Fireworks Salute, The Wireless Remote Control Electronic Igniter, Wireless Remote Controller

JMDM-WXDHQ Fireworks salute, the wireless remote control electronic igniter, wireless remote controller

Introduction
JMDM -WXDHQ is Shenzhen Jingmin Digital Machine Co., LTD. Development of an industrial wireless remote control with high reliability electronic ignition controller, for short to wireless igniter, includes a remote control, can set up two ignition head. The igniter use 4pcs 18650 lithium batteries, it can be used repeatedly charging, the advantages of low power consumption, move convenience, higher dry anti-disturbance performance, widely used in fireworks, salute, ore mining or construction at the scene of the blast, television, remote control of blasting such as ignition.
Electric ignition introduction:
1. Use current make electronic ignition head heat, producing the explosion of a spark to ignite the product launch way called electric ignition.
2. Electric ignition is usually adopt in the process of setting off a kind of method, the advantages of electronic ignition than traditional ignition: Safer, humanization; Strong controllability, real-time; Through the electronic ignition device not only can set off against fireworks do remote control ignition, but also can according to the needs of the theme activity, to set the time rhythm, the overall momentum, picture effect in the air, fireworks layout, make the activities more rhythm sensation, step by step make activities to a climax; The personal safety of setting off staff can have good protection effect.
Performance parameter
The ignitor with high-performance single-chip microcomputer as the core design, simple structure, reliable work and self-learning function.
1. Small size, a single ignition host size: 10.8cm*5cm*1.5cm; The remote control circuit board size: 4cm*7cm*1.5cm;
2. Each igniter distribution with a remote control, each igniter has 2 sets output, each set can series connection or in parallel max 4 ignition detonated at the same time;
Product feature
1. Normal directly put fireworks to ignition is clipped on the terminal to remote control, and can be used repeatedly;
2. Don't repeat wireless codec technology, which can realize in three of the eight power coding;
3. Avoid wiring, installation, setting off high degrees of freedom, convenient to carry;
4. Battery power: Use 18650 lithium battery series power supply;
6. Remote control distance: Within 100 meters;
7. Prevent fire walk: With remote control keyboard lock function, prevent the controller fire walk happen risk.
8. Operating temperature range: - 30-- +85 centigrade
Usage
1. Turn off the electronic ignition power switch, put battery into battery holder.
2. In the condition of closed ignition power switch, connect fireworks product access to the corresponding output wire clip, that the black clamp 1 and the red wire clip 1 be the first group, the black line 2 and line clip 2 be the second group, connect division pesitive and negative, pay attention to the number of corresponding set of black and red wire clip must be pick up a set of each line (a group of wires in two root).
3. Check whether there is peripheral hazards, so as not to burn hurt people or cause a fire, after everything is ready, open the ignition switch.
4. Away from the fireworks, remote control button operation method: First, press prepare button, the controller is in a state for ignition; According to the corresponding ignition button can be realized; Cancel the ignition state can press the cancel button, press the remote button at this time will not have the ignition operation, lest produce wrong operation;
6. Don't need operation, please turn off the ignition controller and main switch;

Application
Suitable forfireworks, salute, ore mining or construction at the scene of the blast, television, remote control of blasting such as ignition.