Fiber Optic Patch Cord St Mm Simpex -Duplex

LC/SC/ST/FC Multi-Singlemode Optical Fiber Patch cords 

Attention for use:

 The same at both ends of the fiber wavelength optical module Simple distinction is the color of the light module to be consistent . Under normal circumstances, shortwave optical module using multimode fiber ( orange fiber ) ,Long wavelength single-mode fiber module ( yellow fibers ) to ensure the accuracy of data transmission.

1 , fiber optic jumpers must be ferrule end face of the ceramic ferrule and wipe clean with alcohol and cotton prior to use .

2 , the use of optical fiber minimum bend radius of less than 30mm.

3, ferrule and ferrule end face protection against bumps , pollution, dust caps to bring timely after the demolition .

4, Do not stare into the laser signal is transmitted by the fiber end .

5, there should not be anti- human , and other factors that damage the timely replacement of damaged fiber jumpers.

6 , should read the instructions carefully before installation , and installation under the guidance of engineers, manufacturers or distributors .

7,Do not use excessive fiber bending and circling, this will increase the light attenuation in the transmission process.

8, fiber jumpers must use protective sleeve after using the protected fiber optic connector , dust and oil will damage the fiber coupling .

9, if the fiber optic connectors are dirty , then you can use a cotton swab dipped in alcohol to clean , otherwise it will affect the quality of communication.

10, fiber optic network or system anomalies , troubleshooting method can be individually tested . When testing or exclusion jumper off test failures can do first ,Usually visible laser pointer can be used for the entire fiber link lighting judgment.

Or further use of precision optical fiber insertion loss return loss meter, test its targets , indicators within acceptable range, indicating normal jumper , otherwise unqualified.

1.CATV

2. Optical fiber communication systems

3. High-speed data transmission

4. Building network access

5. Cabling system, ODF

6. Local Area Network
7.Testing Equipment

Packing:Individual package

 Professional processing equipment and Test instruments Flow:

Certificate:

Our advantage:

1. Benifit from 12 year's experience

2. Direct factory price

 3. Many kinds of payment: L/C,TT,ESCROW,Western Union

Contacts:

Contact Person:Cathy liang

Contact Number:+86-15919078850

Tel:86-755-26815233

Address:2nd floor, Building A,NO.3 YongHe road,shiyan,baoan,shenzhen,china

Please feel free to contact us. Any your requirment will get reply within 12 hours. 

Questions:

Qs1: What is the warranty of your products?

AS: Our warranty is Life Time.

1.If the products have quality problem, we can change it. Also the shipping fee is on  us.

2.If the products have quality problem by wrong using or other woring ooperate, we can support free repair.

But the shipping fee  is on clients.

Qs2: Is every fiber patch cord with 3D checked 100%?

AS: Our products is 100% test before shipping.

1. Our standard quality system is IEC Satandard&3D Standard.

 Qs3: OEM is acceptable? Can you support free samples?

AS: OEM is acceptbale. We can design it for you or you send your design to us.

Free samples: we can support free samples in less quantity if you do not mind the shipping.

 Give us a chance to cooperate, also gives you a choice, thank you.