Electronic Cigarette 2014 Hottest Original Innokin Itaste MVP

Electronic Cigarette 2014 Hottest Original Innokin Itaste MVP 

itaste e-CIGS Content:

1X iTaste MVP 2.0
1X iClear30 Dual Coil Clearomizer with cozy rotatable drip tip
1X USB cable with iPhone/iPod, micro USB, and mini USB connections (Motorola, Blackberry, Nokia, LG, Samsung)
1X Beauty ring-thread cover
1xTransparent carrying case
If buying e-liquid also, please make sure you select the correct UPS delivery method

Main Features:

1. Voltage can be adjusted from 3.3 5.0 volts in. 1 volt increments.

2. Wattage can be adjusted from 6.0 11.0 W in. 5 watts increments.

3. Reads resistance of your atomizer/cartomizer/clearomizer.

4. Puff counter will record the number of puffs you have taken. Either press "P "button or "U" button 1 second to check puffs, The Puff Counter will be cleared when the device is turned off.

5. Short Circuit/Atomizer Protection protects the iTaste MVP against shorted atomizers.

6. The iTaste MVP monitors the battery voltage and will automatically turn off when the battery is discharged.

7. The iTaste MVP battery capacity is displayed via green, yellow and red LED lights. Green = Fully Charged Yellow = Half Discharged Red = In need of charging

8. ITaste MVP e-cigarette built-in 2600 mAh polymer Li-ion rechargeable battery.

9. Thread fit iClear10, iClear16, iClear30 etc

The iTaste MVP uses a built in Micro USB Port. You can recharge it with a Micro USB cable. It can also work as a pass-through for use while charging.

Remembers last set voltage or wattage when the battery is turned off and then back on.
Built-in 3 digit display:
Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the battery was turned off.

Variable Wattage Mode:

Press the "P" button for 3 seconds to enter variable wattage mode. The screen will show you the Puff counter first followed by the last adjustment (The last adjustment may be a voltage or wattage setting), after showing the last adjustment, the iTaste MVP will enter variable wattage mode. Wattage can be adjusted from 6.0 to 11 watts in. 5 watt increments by pressing the "P" button.

Ohms Meter & Battery Level Indicator & Puff Counter:
Hold both the "P" and "U" buttons simultaneously for 2 seconds. The screen will show a series of readings, the first being the resistance of the attached load ( Rx. X, for example R2.2), the second being the battery voltage, the third being the number of puffs since the device was last turned off and the fourth being the last set voltage or wattage. If no load is attached the display with show "NON".

If you wish to check the number of puffs taken since the iTaste MVP was last turned off, you can also hold either the "P" or the "U" button to display the Puff Counter which will be followed by the display of current mode (VV mode or VW mode). In this state, you can also adjust the voltage or wattage by pressing the "P" or "U" button.

LED Light Blinking Mode:

The LED light will blink in different colors to indicate the current battery voltage

1. Red LED light = battery voltage is lower than 3.61V

2. Yellow LED light = battery voltage between 3.61V and 3.75V

3. Green LED light = battery voltage is more than 3.75 V

4. Red LED will keep blinking for 8 seconds when battery capacity is lower than 3.3V and the device will turn off automatically.

5. Red LED light will stay on for 5 seconds when a load short circuit is detected or the current of the coil is more than 3.5A, then no vapor will be produced.

6. If you take a drag for longer 10 seconds, the battery will stop it's output, the RED light will blink 10 times, and the iTaste MVP won't continue to work until you press the power button again.