Realtime GSM GPRS GPS Tracker Car GPRS Tracking GSM Tracked System Tc68s Vehicle Tracker

Realtime GSM GPRS GPS Tracker Car GPRS Tracking GSM Tracked System TC68S Vehicle Tracker

1. Notice
1.1 Usage Information
This is a wireless communication terminal product, please turn off device when enter gas station, hazard zone, or where wireless products are prohibited.
This product can't be installed where exposed to rain or high temperature.
This is a GPS positioning product, therefore only function wherever GPS is available, can be interfered by poor weather or GPS Blind Spots.
Since this is a wireless device, in order to achieve a better reception, when using OBD extender, two end tips can't come in contact with martial surface.
The operating voltage of this product is DC12V, and can't be installed with 24V or 36V, otherwise it will
Damage the unit, and it will not be covered by the warranty.
Turn off the engine prior to installation, plug in the terminal and then start the vehicle.
If the OBD connector is located far reach under the dash, this might also contributed to poor receptionist, and can be improved by using an extender.
In order to prevent unwanted damage or removal, consider using the OBD extender to relocate and place the unit at a more ideal location.
Specifications and Functions
Introduction
The TC68S is a user-friendly GPS vehicle tracker plugged into the vehicle's OBD connector which can providevehicle positioning, tracking and anti-theft.
With standard OBD II plug, the TC68S can be easily and quickly installed.
When TC68S is being removed, it will send alert notification to mobile devices or servers.
The TC68S is suitable for all private cars and other vehicles with OBD II connector.
Functions
1 GPS Tracking
2 Alarms
3 Integrated Functions
4 GPS Tracking
5. SOS A71
This command is to set the SOS emergency communications number, call the phone number, inform the location by SMS and other SMS additional features at the same time.
6. Listen-in (Voice Monitoring) A72
7. Smart Sleep Mode A73
This command enables the sleep mode function. In this mode, logging, timinga and location are all disabled.
8. Time Zone B35
This command modifies the SMS report to display the correct local time. Default Beijing time, GMT480.
Please follow below instructions for time zone modification

9. More Settings
TC68S can be configured by SMS commands or by a computer with Meitrack Manager to configure multiplefeatures. For more details, please refere to Configure by Computer.