GPS Real Time Vehicle Tracker & Electric Bicycle Alarm with Remote Controller Host 1 in 2 RF-V12

Real-Time Tracker & Electric Bicycle Alarm anti-theft system RF-V12 for person
New features of this electric vehicle alarm:

Mobile phone monitors your electric vehicle anywhere anytime simultaneously.
Positioning and tracking via SMS instruction or internet or Android phones.
Locks your electric vehicle in case of steering
Lock damage, attempted wire connection, or short circuit
Cut-off of battery line triggers mobile phone alarm
Plug-and-play device for 36V/DC-96V/DC electric vehicles

Install the alarm
This product is a fool proof design installation, just connect all accessories with right port. Smart
Host connect to vehicle controller alarm port and power port to complete the installation.

If the vehicle controller have no port for alarm. Please install the alarm as below:

GSM host operation instructions:
In order to guarantee the safety of the GSM alarm and the privacy of the user, the alarm comes with a default password of 123. Please change the password timely.

Change Password: Send existing password(+)T(+)new password in an SMS to GSM host number. For example: Sending 123T456 in an SMS will change the password to 456.

Language switching
Send password(+)LAG1 to change the language to Chinese (factory default).
Send password(+)LAG2 to change the language to English.
Send password(+)LAG3 to change the language to Russian.

Enable alarm function: Send password(+)AON to turn the alarm on and bind it as the pre-programmed phone number. The alarm will send an SMS or call to report an emergency. For example, you can send 456AON in an SMS to start the alarm and get it bundled with the
Pre-programmed number if your password is 456.

Disenable remote alarm function:
Send password(+)AOFF to disenable mobile phone alarm function.

Enable monitoring function:
Send password(+)HM1(2, 3, 4, 5) for monitoring, otherwise the alarm will reject phone calls. You can pre-program at most 5 numbers for monitoring.

Remote monitoring functions:
Remote locating: Send password(+)LBS, you will get address with a map link. Click the link it will show where is your vehicle. (Please make sure the SIM card has GPRS data function. )
Remote check of IMEI: Send password(+)DSP, the alarm will report information like IMEI, signal and the GSM host built-in battery status.

Vehicle tracking online:
Send password(+)GON to make the alarm upload position and vehicle status data to the platform
Regularly. Visit www.trackanywhere.org and use the IMEI number to login to the platform with the default password of123456. You can check the location of your vehicle and its recent routes. (Please make sure the SIM card has GPRS data function. )
Send password(+)GOFF to stop uploading data to the website.

Wire cut-off alert: When the wire of the alarm is cut off, or the vehicle's battery lost, the alarm will send an SMS: The alarm system has a power outage, please check it timely!

Low battery alert: When the GSM host built-in battery is low, the alarm will send an SMS: Your
Alarm battery is too low, please charge timely.

3 options for alarm mode:
Send password(+)MOD1 to set alarm mode to: SMS before call (factory default).
Send password(+)MOD2 to set alarm mode to: Call only.
Send password(+)MOD3 to set alarm mode to: SMS only.

Notes:
Applicable to electric vehicles with power supply of 36V-96V.
Please install the GSM alarm host in a position with a stronger signal.
GSM host should not near to the smart host antenna

Accessories:
Sarmt host *1
GSM vehicle alarm host *1
(network: 850/900/1800/1900)
Loudspeaker *1
Remote control *2
User manual *1