Long Standbygps Tracker V690 for Kids/Elderly Tk302 with Screen Show Time Supports Single Positioning and Continuous Tracking

Mini screen personal tracker V690 Two way talking support gprs protocol tracker for kids/elderly tk302 sos tracker alarm



The device has the following features and functions:
GPS individual or fleet positioning;
GSM /GPRS modem supports two frequency bands, i. E. 900/1800(850/1900)MHz(options)
High-sensitivity, new workmanship and the most advanced GPS chip;
Can accurately position even if with weak signals;
Can work effectively in limited space such as the remote and narrow places in a city;
Low energy consumption;
Fast signal capturing;
Supports single positioning and continuous tracking;
Supports alarming and remote monitoring;
Supports fast dial button;
Supports the location information inquiry by SMS and Internet
May monitor without disturbing the tracked person and realizes real-time tracking;
Can position the holder by call or mobile phone SMS;
In emergency, press the SOS button to have an accurate positioning.
Insert SIM/SD card and install backup battery.

Open the back cover, then you will see the place where the SIM card is placed. Then push the SIM card into the slot until it comes into its proper position completely and make sure it is locked. See the following figures:



Package Include:
GPS unit V690
Wall charger
USB cable
User guide in CD


1. SOS Function
If a ward number (the number in 3 above) is set, when the ward encounters emergency and presses the SOS button, then the terminal will send alarming information to the center number and dial three ward numbers in order.

2...Monitoring Function
The ward may send SMS 555 + password to the terminal of the ward; In such case, the ward terminal of the ward will automatically call back the mobile phone of the guardian and the guardian may listen to the sound of the surroundings within 10m around the ward.
SMS format: 5550000
Remarks: 0000 is the initial default password and the actual use s subject to the actual password.

3...Regular Upload Interval Setup
The defaulted factory upload interval of this device is 2 minutes for getting the point and 10 minutes for uploading one piece of positioning information. The user may change such parameter according to actual demand.
Command format: # command number 730# Sampling interval # Pieces of uploads # User password ##
For example: 730#20#4#0000##
Note: The parameter "20" indicates getting one point every 20s; After getting points accumulatively for 4 times, upload one piece of positioning information with the upload interval as 20*4=80s. The user may change this parameter as the case may be.

4. Low-Voltage Alarming Function
If the terminal of the ward has a very low power and needs to be powered off, the terminal of the ward will automatically upload one piece of low-voltage alarming command to the monitoring center number.

5. Set APN Command

6. Setup of Server Address

7. Electronic Fence Function