2014 Newest GPS Watch Tracker GPS301, Quad Band, Realtime, Listen in, Two Way Talkin

Support:
1) Dial a phone, Text message, Route logging and repeat, Call, speak, Storage and Data load, Tracking another GPS
2) Sleep mode to save power, forward the third parties' message
3) Movement, geo-fence alert, shock sensor alarm, low battery alarm, view map on the cell phone screen, Get address name in SMS from cell phone
4) Free PC installation GPRS tracking&monitoring software
5) Configure parameters by USB cable(Free, include in the package)
6) Support to work on
Usage
1. Startup
Put the SIM card and battery in place. (NOTE, GPS301 need to use a SIM card, support 2G, 2.5G, not support 3G, or 4G)
Turn on the unit outdoors by pressing the "on/off" button until the screen is on.
For first use, please initialize the unit and restore it to default setting.
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals.

2. My Location
The main interface shows current position with latitude & longitude, time, speed, direction and altitude.
Press SOS button twice to get the current address (Need configure the APN before use this function), it will show absolute street address on screen, press "on/off" button to quit and the absolute street address will delete automatically.

3. Dial a Phone
Enter to phonebook by press call button of main interface, choose authorized cell phone No. Or other preset cell phone No. Via page button, you only can call the authorized cell phone No. If there is no preset cell phone No., press call button to call and press "on/off" button to end the call.

Note:
* Speaker mode is default. It will be automatically turned off when headphone is connected to GPS device for phone calls.
* Adjust volume: Under communication state, short press PAGE button to turn up volume and short press SOS button to turn it down

4. Text Message
Non-command SMS message from authorized number will automatically pop up. Short press Call button to reply "No", short press SOS button to reply "YES" and messages will be deleted. If you don't want to reply, just short press on/off button to quit and delete the message

5. Route logging and repeat
* GPS device will enter Select interface after long press PAGE button in main interface, please operate according the tips. Select Route Logging and short press SOS button to enter, the last route will be deleted if New Route option is selected. If Old Route option is selected, the old route will be kept and new route will be recorded in the meantime. Position data will be recorded every 10 seconds (No longer than 1 hour is recommended), short press on/off button to stop and save data.

* GPS device will enter Select interface after long press PAGE button in main interface. Select Route Repeat and short press SOS button to enter. Route logged will display on screen and current location will display every 2 seconds. In case of a deviation, please adjust route accordingly. Short press ON / OFF button to exit.

6. Tracking another GPS
A. This function is used to track another GPS tracker's direction & distance and display it on screen in order to approach it quickly.

B. Establishment of relations between Manager and managed device

C. Activate tracking another GPS

* Short press on/off button to exit.

D. Single way track and 2-way track

7. Single Locating

8. Auto track continuously
* Track with limited times upon time interval
* Smart track upon time and distance interval

9. Location based service (LBS)

10. Absolute street address by SMS

11. Track mode

12. Monitor

13. Call

14. Speak

15. Storage

16. Data load

17. SOS Alert

18. GPS blind Spot alert

19. Movement alert

20. Geo-fence

21. Multi-area management

22. Low battery alarm

23. Sleep Mode

24. Forward the third parties' message

25. Charges Inquiry

26. State Checking

27. TCP/UDP Switch