12V 20A Automatic 3 Stage Battery Charger with Full Range Input Voltage

12V 20A Automatic 3 Stage Battery Charger with Full Range Input Voltage

Specification:

BAC-1215/1220/2408/2410 series use the inset switch power methods charging for the battery. It can constantly charge for the battery 360days/24hours. With the increasing of the battery voltage, the power gets smaller till the battery is full and turns to floating charge(Compensate for lead-acid batteries for medium power drop caused by leakage), this wont be harmful for the battery and it could extend the battery life.
It ensures the important places' generator automotive, electronics, telecommunications, military, hospitals, banking, transportation, chemical and biological training and other battery-powered equipment having full power support and always have normal full power and working properly.

Charge methods:
Constant current charging -constant voltage reduce-floating charge

Details:
Input voltage: 90-130V AC /180-260V AC Frequency: 50/60Hz
Minimum voltage of the low voltage: 110V: 90V AC lower than this voltage may reduce the charge power Or cant charge
220V: 180V AC lower than this voltage may reduce the charge power Or cant charge.
Minimum voltage of the high voltage: 110V: 130V AC high than this voltage may cause the charger damage forever.
220V: 260V AC high than this voltage may cause the charger damage forever.
Output voltage: 12V charger Normal voltage when it is charging: 14.7± 0.3V, floating charge voltage: 13.8± 0.3V
24V charger Normal voltage when it is charging 29.4± 0.5V, floating charge voltage 27.6± 0.5V
Output power: : 12V charger model: 1215 charge power≥ 15A
Model: 1220 charge power≥ 20A
24V charger model: 2408 charge power≥ 8A
Model: 2410 charge power≥ 10A
Using temperature: -20º C~50º C

Using methods:
Please connect this machine with the battery correctly. (red line connects to the positive of the battery and the black line connects to the negative of the battery), turn on the power, then turn on the switch after.
Status of the LED light
1. Green LED: It is the normal charging time.
2. Red LED: That means the battery is full, and it gets into the floating charging status.
Attentions:
1. Don't mix the positive and negative. (If you set it wrong, you have to change the output fuse)
2. Don't charge for the non-rechargeable battery or the charge voltage of the battery is not suitable for this machine.
3. Don't charge when the mains voltage is in a changeable situation, otherwise it might cause a very big damage of the machine.
4. Don't make the liquid and medal things into the machine, and avoid get a electric shock and the charger being destroyed unnecessarily.
5. Don't put it close to the pyrotoxin and make sure keep the inlet and outlet unobstructed. Don't keep the output for long time short-circuit.
6. High voltage in side the charger, for safety, put it at the place where the kids cant reach.

Contact:

Sales: Jessie Zhou
Ging Tai Shing Elec Co. Ltd
4F, 4BLDG China, NUCLEAR 2ND IND DIST, BAISHIZHOU, SHAHE ROAD, SHENZHEN, China
Tel: 86-755-26604720; Fax: 86-755-22643225