Fiber Splicing Enclosure Vertical Type 2 in 2 out 96 Fiber (CL-FEVR-V02)

P/N: CL-FEVR-V02

Fiber Splicing Enclosure Vertical Type 2 in 2 out 96 fiber

Purpose: Aerial, direct-burying, wall-mounting, Pipeline laying way
External dimensions: 510mm× 210mm (Erect type)
Weight: 3kg (Erect type)
Material: PC
Dimension (mm): 51× 22CM (H× D)
Cables Entry & Exit: 2 out 2 in
Cable Diameter (mm): Φ7-Φ25
Sealing Structure: Mechanical Sealing
Max Capacity of Core: 144 cores

Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, metal hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS

Environmental temperature: -40 to +85 degree

Atmospheric pressure: 70-106KPa

Optic property: The spare fiber coiled in the fiber emplacing device; The fiber connector won't attenuate during the FOSC installation operation period.

Seal Performance: After the closures are sealed, then pressurized up to 100KPa± 5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.

Re-encapsulation Performance: The closures are pressurized up to 100KPa± 5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation.

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Insulation resistance: ≥ 2X104MΩ
Maximum capacity: 144cores
Span-life: 30 years.

It is widely used for communication, network system, cabled T. V. Of CATV, the fiber optic cable by network

Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables.
Suitable for single core fiber optic cable and ribbon fiber optic cable.