HDMI to VGA+YPbPr+Audio HDMI Converter

HDMI to YPbPr + SPDIF + R/L or VGA+SPDIF converter


This 2 way HDMI to YPbPr + VGA+audio switch converter is designed for TV or projector with component video or PC with VGA video inputs. This unit has two independent HDMI inputs to avoid the frequent swaps of video sources. It adopts the newest highly integrated video processing ICs to convert high-definition HDMI A/V signal to high-resolution VGA signal or high-definition YPbPr component video signal and provides the 2CH/5.1CH stereo and sound capabilities for your display devices (TVs, projectors, monitors) and A/V receiver. Pure signal processing through hardware, a great compact gadget of high quality; No need to install drivers, portable, flexible, plug and play.

Features:
One HDMI input signal convert to one YPbPr + SPDIF + R/L or VGA+SPDIF sink device
Supported video input: HDMI 1.2a
Supported audio output: SPDIF (optical) + R/L analog
Supported output: Support up to UXGA and 1080P (50/60Hz), the same format as input
HDCP 1.2 protocol compliant
LED indication: When source or sink is working, LED relative to is light
No loss of quality
Installs in minutes
Needs 5V DC/0.8A power supply


Operating and Connecting:

1. Connect one cable from HDMI1.2 sink into the Converter input.
2. Connect VGA+SPDIF or YPbPr+SPDIF from monitor or projector into Converter outputs.

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
1.  The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and
oxidative environment.
2.  All parts will be free from the strong shake, hit, fall.
3.  Touching the power adaptor with the wet hands is prohibited.
4.  Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.  Pls turn the power off when the machines is not used for long time.
6.  Pls do not open the cover and do not touch the inside parts.
7.  Pls use the original factory power adptor.


IV Product I/O Interface
1. Inputs: HDMI1, HDMI2
2. Video Output: YPbPr Component Video or VGA
3. Audio Output: 2CH L/R Stereo and 5.1CH SPDIF Optical Audio
4. Input mode:
HDMI input mode: 480I, 480P, 576I, 576P, 720P, 1080I, 1080P
5. Output mode:
A. YPbPr output mode: 480I, 480P, 576I, 576P, 720P, 1080I and 1080P
B. VGA output mode: 480I, 480P, 576I, 576P, 720P, 1080I and 1080P
5. Audio Interface: SPDIF Digital Audio Output and Stereo L/R Audio Output
SPDIF supports audio receiver or amplifier, is capable of 5.1 audio output


LED: --------------------------------- Power indicator
DC/5V in: --------------------------- Power input for adapter DC/5V
HDMI1 / HDMI2: ------------------- HDMI input from video sources
VGA-OUT: ------------- VGA video output
Y-Pb-Pr: --------------- Component video output
VGA - YPbPr: -------- VGA or YPbPr output select switch on input panel
H1 - H2: --------------- HDMI1 or HDMI2 input select switch on input panel
2CH / 5.1CH: --------- Audio format selection switch between 2CH and 5.1CH
L / R: ------------------- Stereo audio output interface on output panel
SPDIF: ---------------- Digital audio output on output panel

V Basic Troubleshooting
1. No video signal output
A. Check power and the power LED light on the unit
B. Make sure input AND output select switches are at the correct positions
C. Input Video Format Resolution must be supported by the display unit
D. Check all input and output cables and contacts, make sure to use the correct cable, component video cable is RGB "Red Green Blue".
E. Perform hard power reset by disconnecting power input and input cables
Check HDMI to VGA output resolution with the following corresponding
2. The YPbPr / Component video output maintains the same video format as the HDMI inputs up to 1080P; Please make sure that the display unit can support 1080P for 1080P application. For AppleTV application, the display unit must support 720P. Make sure the display unit can support the video formats provided by HDMI video sources!
3. In 5.1CH mode, 2CH audio output will not have sound; User must make sure that the receiver connected to the SPDIF audio port has the necessary capability to decode the surround sound formats provided by the HDMI sources to have proper audio.