60m Over Single Cat6e HDMI Extender (with IR and 3D)

This HDMI extender can support either single or double cat6e cable. It support 3D and IR under the
mode of double cabt6e up to 60m. And Support 1080P under the mode OS single cat6e cable up to 60m.

Perfect compatibility for various Blue-Ray /HD-DVD/ LCD-TV.
Support Blue-Ray 24fs.
Can not support deep color 36bit unless use CAT7.
Support HDMI1.3 signal (10.2Gbps) Full-HD 1080P for CAT6/CAT6e/CAT7-60metres transmit. After signal receive, it still can proper works with add splitter or switcher then connect LCD/PDP.
Replace the HDMI cable with two CAT6 cable(568B standard). It can be used in family decorating, business show, TV education environment which need the HDMI signal transfer/HDMI cables hided and different HDMI cable length.

The special of CAT6 cable replace the HDMI Cable transfer:
1. HDMI length and connector is solid after production. Users cannot change its Length or re-connect. But CAT6 cable can be change length or change connector conveniently.
2. HDMI cable and connector need some angle during installation. And HDMI cable is strong, it cannot be hide installed. Opposition, CAT6 cable is very conveniently installed in hide.
3. CAT6_HDMI_60m transmitter and receiver can transfer Full-HD 1080P signal over CAT6 wires for 60m length. It also can transfer HDMI 1080I/720p signal over CAT6 wires 100M length. Normal HDMI cable length is 1M or 1.5M, or 3M, the longer HDMI cables need specially production, it is difficult to purchase.

Easy install, user can connect CAT6 with TIA/EIA568B standard.
Don't care about wires length. Don't care about install style.
Do not worry about connecting the cables wrongly, if so, just change the connection.
Need 5V power adapter. You can insert it in TX.

Installation:
Connect HDMI signal sources (Such as HD-DVD\PS3 ) to HDMICAT6_0101A HDMI input.
Connect the EIA/TIA 568B two long CAT6 cables to HDMICAT6_0101A output socket.
Length not more than 60Metres for Blue-Ray1080P24fs transfer.
Connect the EIA/TIA 568B two long CAT6 cables to HDMICAT6_0101B input socket.
Connect LCD with HDMI interface to HDMICAT6_0101B output socket.
When ex-power adaptor works, the upper LED is red.
When signal works fine, the lower LED will be blue, otherwise quench.