4 Port HDMI Splitter Over 60m Single Cat Cable

FEATURES
One HDMI Input Distribute And Extend To Found Display By Four Cat6/7 Cable. The Extend Distance Can Be Up To 60m.
Support 3D
Support Video Output: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Audio Format Support: DTS-HD/Dolby-TrueHD/LPCM7.1/DTS/Dolby-AC3/DSD
LED Status Light: The Related Led Light Will Go Bright.
The Extend Distance Can Be Up To 60m.
Support Signal Retiming
No Loss Of Quality
Installs In Minutes
TX Uses The DC5V/3A Power Adaptor.
Four RX: Each One Uses 5V/1A Power Adaptor

SPECIFICATIONS:
Length of CAT-6 cable between Rx and TX...Up to 60m
HDMI Input...24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input...DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output...24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output...LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth...225MHz
Max baud rate...6.75Gbps
Input Video signal...0.5~1.5Volts p-p
Output DDC signal...5Volts p-p (TT1L)
Input HDMI cable distance...≤ 15m AWG26 HDMI standard cable
Output HDMI cable distance...≤ 20m AWG26 HDMI standard cable
Max working current(TX)...2000mA
Max working current(RX)...600mA
Power adapter format(TX)...Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/3A
Power adapter format(RX)...Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range...(0 to +40 degree)
Operating Humidity range...5 to 90%RH (No Condensation)
Dimension (TX)...205x74x26(mm)
Dimension (RX)...(82X44X22) (mm) X4pcs
Weight...750g

Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
All parts will be free from the strong shake, hit, fall.
Touching the power adaptor with the wet hands is prohibited.
Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
Pls turn the power off when the machine is not used for long time.
Pls do not open the cover and do not touch the inside parts.
Pls use the original factory power adaptor.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: