Qsfp Cable Sff-8436 to Cx4 Sff-8470 Cable Ejector Pull Latch
- Payment Type:
- L/C, T/T, Paypal, Western Union
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | Shenzhen, China |
|---|---|
| Payment Type: | L/C, T/T, Paypal, Western Union |
Product Description
Product Description
QSFP Cables for CX4 Applications, SFF-8436 to SFF-8436 cable use InfiniBand style SFF-8436 connectors with the ejector type latch.
FF-8436 QSFP, 38 pos, Plug to Plug
: QSFP-to-QSFP Cable Assembly, 30 AWG~24AWG
Length: 0.3m(0.984')~20m(65.6')
Multi lengths available.
Quad Small Form-factor Pluggable (QSFP+) solution is designed for high-density applications. Components of the system include the Electro Magnetic Interference (EMI) shielding cage, active optical cables (AOC), passive copper cable assembly, active copper cable assembly, optical MTP cable assembly, optical loopback, 38-circuit SMT iPass™ Host connector, and stacked integrated connectors and cages.
The SFF-8436 document specifies a transceiver mechanical form factor with latching mechanism, host-board electrical-edge connector and cage. The hot-pluggable transceiver integrates 4 transmit and 4 receive channels. QSFP+ transceiver can replace up to 4 standard SFP+ transceivers. The result is greater port density and overall system cost savings over traditional SFP+ products. QSFP+ cable assemblies are designed to accommodate stacked and ganged connector configurations in extremely high-density requirements. This system will support 10G Ethernet, Fibre Channel, InfiniBand*, SAS and SONET/SDH standards with different data rate options.
Active Optical Cable (AOCs) extremely low power consumption of only 0.78W per cable end improves overall data center power consumption and thermal efficiency. AOCs reduced cable bulk compared to larger diameter copper cabling enable deployment of additional ports for increased number of AOCs per system, resulting in more connectivity options and total system cost savings. Four bi-directional optical data links per end each operate at data rates from 1.0 to 10.325 Gbps and are compatible with multiple protocols including InfiniBand* single data rates (SDR), dual data rates (DDR) and quad data rates (QDR), Ethernet systems (10 and 40 Gbps), Fibre Channel (8 and 10 Gbps), SAS (6 Gbps).
The optical pluggable QSFP+ MTP cable assemblies are constructed with 12-fiber 3.00mm round cable for short-run interconnect cable assemblies and provide improved fiber management in the chassis. A robust 4.50mm round cable ensures cable integrity and improved cable routing for installations that require chassis to be spread out more than 25 meters. Loopbacks feature a compact housing compatible with module spacing and loop optical transmit ports to receive ports for testing, burn-in and field troubleshooting.
Automotive:
Switches
Networking:
Router/Switch
SAS
SATA
Telecommunications:
Hubs
Routers
Switches
FF-8436 QSFP, 38 pos, Plug to Plug
: QSFP-to-QSFP Cable Assembly, 30 AWG~24AWG
Length: 0.3m(0.984')~20m(65.6')
Multi lengths available.
Quad Small Form-factor Pluggable (QSFP+) solution is designed for high-density applications. Components of the system include the Electro Magnetic Interference (EMI) shielding cage, active optical cables (AOC), passive copper cable assembly, active copper cable assembly, optical MTP cable assembly, optical loopback, 38-circuit SMT iPass™ Host connector, and stacked integrated connectors and cages.
The SFF-8436 document specifies a transceiver mechanical form factor with latching mechanism, host-board electrical-edge connector and cage. The hot-pluggable transceiver integrates 4 transmit and 4 receive channels. QSFP+ transceiver can replace up to 4 standard SFP+ transceivers. The result is greater port density and overall system cost savings over traditional SFP+ products. QSFP+ cable assemblies are designed to accommodate stacked and ganged connector configurations in extremely high-density requirements. This system will support 10G Ethernet, Fibre Channel, InfiniBand*, SAS and SONET/SDH standards with different data rate options.
Active Optical Cable (AOCs) extremely low power consumption of only 0.78W per cable end improves overall data center power consumption and thermal efficiency. AOCs reduced cable bulk compared to larger diameter copper cabling enable deployment of additional ports for increased number of AOCs per system, resulting in more connectivity options and total system cost savings. Four bi-directional optical data links per end each operate at data rates from 1.0 to 10.325 Gbps and are compatible with multiple protocols including InfiniBand* single data rates (SDR), dual data rates (DDR) and quad data rates (QDR), Ethernet systems (10 and 40 Gbps), Fibre Channel (8 and 10 Gbps), SAS (6 Gbps).
The optical pluggable QSFP+ MTP cable assemblies are constructed with 12-fiber 3.00mm round cable for short-run interconnect cable assemblies and provide improved fiber management in the chassis. A robust 4.50mm round cable ensures cable integrity and improved cable routing for installations that require chassis to be spread out more than 25 meters. Loopbacks feature a compact housing compatible with module spacing and loop optical transmit ports to receive ports for testing, burn-in and field troubleshooting.
Automotive:
Switches
Networking:
Router/Switch
SAS
SATA
Telecommunications:
Hubs
Routers
Switches
Related Keywords
Related Keywords
