Live Animal Trap an-B030

Live Animal Trap AN-B030

The Solar Animal Repeller is an effective way to help rid your garden of uninvited animal visitors. It combines a sophisticated PIR detection system that detects movement and triggers short bursts of powerful ultrasonic sound waves and flashing strobe lights.

SPECIFICATIONS
Power Supply: 3 x AA batteries
Effective distance: Till max 8m (depending on weather and surroundings)
Detecting angle: 110° Horizontal (depending on weather and surroundings)
Fully waterproof.

INSTALLING THE BATTERIES
This device has a built-in solar panel which keeps the battery charged.
Place the batteries (Provided) in their compartment at the back of the unit. Make sure of the polarity.
It is advisable, before installing the batteries, check whether they are properly charged.
Close the battery compartment with 4 screws provided.

The device has built-in low-battery detection and warning, if meet the rainy day continuously, the batteries do not have enough power, the low battery LED will flashing, then customers can use USB line connect DC socket(refer to photo) to charge the batteries(you can also connect adaptor to charge), also the device has over charge protection, it can protect batteries during over charging.

OPERATION
- A strong ultrasonic signal frighten animals. The animals avoid the area because of its unpleasant ultrasonic sound. The sound is activated when an animal enters the range. Thus, animals can not get used to the sound, and the repulsive effect is stronger.
- A strong flashing scared animals. The strong flashing is activated when an animal enters the range, then the animals will be scared and give back.

WHERE TO PLACE THE DEVICE
1. Install the pest animal repeller to the desired location, in such way the device faces the ground to protect. Fix the spike stake on the unit, Plant the unit into the ground at the place that seems more favorable.
2. The back of device has the hang hole, you can hang up the device to the place that you want frighten animals.

SETTINGS
- Button "SENS" (Left): Is for adjusting sensitivity and distance. By turning the knob clockwise, you increase the range of protection. To repel small animals, turn the knob up to the right.
- Button "FREQ" (Right): Frequency control. By turning the knob clockwise, you increase the frequency.
Button "FREQ" Position:
- 1: 13.5kHz-17.5kHz Repels animals such as mice, small rodents, ...
- 2: 15.5kHz-19.5kHz Repels animals such as large dogs, foxes...
- 3: 19.5kHz-23.5kHz Repels animals such as small dogs, cat, bird...
- 4: Strong flashing
- 5: All function working, sweep frequency from mode 1 -- mode 2 -- mode 3, and turn on strong flashing

ATTENTION
The base of the top shall be exposed to the outside, according to the terrain varies ensure the water does not exceed the waterproof safety line.