Food Grade Injection Molding Silicone for Baby Nipple Manufacture

Food grade injection molding silicone for baby nipple manufacture

Injection Moulding Silicone Rubber for Baby Care Products.

Standard Datasheet

Item
HY-920
HY-950
Appearance
Transparent
Transparent
Mixing ratio
1: 1
1: 1
Viscosity (Pa. S)
300
600
Density (g/cm3)
1.07
1.08
Hardness (A° )
20
50
Elongation at break (%)
420
510
Tear strength (KN/m)
25
36
Curing condition
After Mixed A with B according to mixing ratio of 1: 1, 150mm× 150mm× 2mm, mould will be formed in 7 minutes under temperature of 150° C



Tipical Properities and application:

HY-920 and HY-950 is an injection molding liquid silicone rubber for Baby care products such as Baby nipples, pacifier, teather, toothbrush and other food grade injection products. They are elastomer cured under high temperature, has the following excellent properies:

1>High transparency

2>Excellent tear Strength(>3.5KN/m)

3>Good resilience

4>Good heat stability and weather ability(temperature resistant range from -60° C to 250° C)

5>Anti-yellowing

6>Heat-ageing resistance

7>Comply with USA CFR21. Part. 177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard





Specific usage:

HY-920 with 20 shore A is suitable for making Pacifiers/nipples for Babies whose age is from 1 month to 1-year-old



HY-950 with 50 shore A is mainly for making Pacifiers/nipples for Babies whose age is from 1year-old to 3-year-old.



Curing Condition:

After Mixed A with B according to mixing ratio of 1: 1,

150mm X 150mm X 2mm, mould will be formed in 7minutes under temperatuer of 150 ° C

Package: The general packages of HY-930 and HY-950 is 20kg or 200kg per barrel.