Liquid Tire Sealant (REACH RoHS MSDS)

Mend puncture tubeless liquid tire sealant

Features
1. It is made of organic polymer materials, which is neutral and is of no corrosion to metals or rubber.
2. Added one time into the tyre and Stops up to 60 leakages.
3. It can cover the breach within 6mm.
4. Good leveling to automatically seek-out the leakage in seconds.
5. No volatile, non-flammable, anti-freezing. Long lasting effect.

Direction
(1). Tires should be properly balanced (if required). Installation should be done with inflator. The tire should be re-inflated to recommended operating pressure. All tires should have similar pressure.
(2). Position the tire valve stem at 5 or 7 o'clock.
(3). Cut off the nozzle-spout about 1/4'' back so it will fit into the tubing. Insert the nozzle into the tubing.
(4). Place the tubing over the tire vavle stem and squeeze in the required amount of sealant. Do not over apply sealant to high speed tires.
(5). Clear valve stem with a shot of air or a thin wire (paper clip). Re-install the valve core and inflate the tire to recommend pressure noted on the sidewall of the tire.
(6). If the tire is already punctures to form a seal. Inspect tires periodically and remove puncturing objects.
(7). After removing puncturing objects, immediately drive the vehicle a short distance to allow the tread to flex and force the sealant into the puncture to form apermanent seal.