GSM Quad Band New Home Security Alarm System with Ademco Contact ID (sn5800)

Introduction:


1. Blue backup LCD display everything you want to konw about the panel.

2. Full compliance with ADEMCO Contact ID.

A. When alarming, you can hear which sensor in which zone is alarming.

B. Voice prompt you how to operate for every step

3.85 event logs about arming/disarming/alarming(with data stamp)viewable directly on the panel LCD.

4.12 seconds voice message, in case of alarming, automatically playing after you pick up your phone.

5. Every detector can be door bell when disarmed; Every detector can be local siren when disarmed.

6. Monitor the old, the sick and the important place: When the old or the sick doesn`t move, or the
Important warehouse hasn`t human presence for a period of time, the panel will alarm.

7. Any zone type is programmable(including: Watchdog zone, exit/entry delay, 24 hours zone, sounder/silent when alarming, armed/part armed zone, sensor/no sensor in the zone)

8. Panel can receive the detector low voltage signal and display zone number and detector number on the LCD and sound a beep

9.7 wired terminals, 12V alarm output, 12V power output(continous), wired siren terminal

10.6 time points of timed Auto-Arming/disarming(24 hour mode)

11. Wireless detector installing test

12. Listen in and speak function

13. Away arming with siren sounder ON

14. Any zone can be seperately armed/disarmed

15. Built-in high capacity rechargeable battery, auto charge/discharge

FOB, PIR detectors, door/window magnetic contact and high decibel integral siren Also available are some optional Devices such as wired/wireless Smoke detectors, Gas detector, Flood detector, Temperature detector. The wireless detector Communicates to the Control Panel by radio on 433 MHz Frequency and each detector has an approximate range of 50 Metres dependent on the Local Environments. The wired detector are also workable.

Note: Auto dial by GSM module, auto send out short message by GSM English voice prompt for every step