Metel Case Solar Power Inverter CE Certificate Ep3000 Series 1kw-6kw Inverter

Get Latest Price

Payment Type:: L/C, T/T, D/P, Western Union

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	Shenzhen, China
Payment Type:	L/C, T/T, D/P, Western Union

Product Description

Metel case hot sell Solar Power Inverter CE certificate EP3000 Series 1KW-6KW Dubai buy inverter

Power inverter 1KW-6KW solar power Inverter
Durable construction for long life under extreme environmental conditions
Low idle current (less than 1 watt) conserves energy when no loads are present
Soft start capability for starting heavy loads
Built-in starting control circuits for two- and three-wire generator starting systems

Simplified controls with a snap-on cover that protects settings from being accidentally changed
Better thermal performance allows full output power to 50° C (122° F) without de-rating
High surge capacity starts more difficult loads and handles overload conditions reliably
Durable powder coated, corrosion resistant steel chassis
New digital display shows kilowatts (kW) when inverting and AMPS (A) when charging, plus incorporates a robust ON/OFF switch and status indicators
70-AMP automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance
New power factor corrected (PFC) charging, combined with a more sophisticated multi-stage battery charging algorithm, reduces electricity draw and generator run-time

MODEL (EP3000)	HV Model
	1012E	1024E	2012E	2024E	3024E	4048E	5048E	6048E
Line Mode Specifications:
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac(120VAC selectable)
Low Line Disconnect	184Vac±4%
Low Line Re-connect	194Vac ±4%
High Line Disconnect	265Vac±4%
High Line Re-connect	255Vac±4%
Max AC Input Voltage	270Vrms
Nominal Input Frequency	50Hz/ 60Hz (Auto detection)
Low Line Frequency Re-connect	58+0.3Hz for 60Hz;48+0.3Hz for 50Hz;
Low Line Frequency Disconnect	57+0.3Hz for 60Hz;47+0.3Hz for 50Hz;
High Line Frequency Re-connect	64+0.3Hz for 60Hz;54+0.3Hz for 50Hz;
High Line Frequency Disconnect	65+0.3Hz for 60Hz;55+0.3Hz for 50Hz;
Output Voltage Waveform	As same as Input Waveform
Over-Load Protection(SMPSload)	Circuit breaker
Output Short Circuit Protection	Circuit breaker
Efficiency (Line Mode)	>95%
Transfer Switch Rating	30A
Transfer Time (Ac to Dc)	10ms (typical)
Transfer Time (Dc to Ac)	10ms (typical)
Pass through without Battery	Yes
Max Bypass Overload Current	30A
Invert Mode Specifications:
Output Voltage Waveform	Sine wave
Rated Output Power (VA)	1000		2000		3000	4000	5000	6000
Rated Output Power (W)	1000		2000		3000	4000	5000	6000
Power Factor	0~1.0
Nominal Output Voltage (V)	230Vac
Nominal Output Frequency (Hz)	50Hz ± 0.3Hz
Auto tracking Main Frequency(Hz)	Yes (Following Main first connection)50Hz @48-54Hz ;60Hz @58-64Hz
Output Voltage Regulation	±10% rms
Nominal Efficiency	>80%
Over-Load Protection (SMPS load)	(110% 150% ±10%: Fault (shutdown output) after 20s;

Surge rating (10s)	3000VA		6000VA		9000VA	12000VA	15000 VA	18000VA
Capable of starting electric motor	1 HP		1 HP		2 HP		3 HP
Output Short Circuit Protection	Current limit (Fault after 10s)
Bypass Breaker Size	30A		30A		30A	35A	50A
Nominal DC Input Voltage	12V	24V	12V	24V	24V	48V	48V
Min DC start voltage	10V/20V/40V
Low Battery Alarm	10.5Vdc ± 0.3Vdc for 12V battery;21.0Vdc ± 0.6Vdc for 24V battery;42.0Vdc ± 0.6Vdc for 48V battery
Low DC input Shut-down	10.0Vdc ± 0.3Vdc for 12V battery;20.0vdc± 0.6Vdc for 24V battery;40.0Vdc± 0.6Vdc for 48V battery
High DC input Alarm & Fault	16Vdc ± 0.3Vdc for 12V battery;32Vdc ± 0.6Vdc for 24V battery; 64Vdc ± 0.6Vdc for 48V battery
High DC input Recovery	15.5Vdc ± 0.3Vdc for 12V battery;31.0Vdc ± 0.6Vdc for 24V battery; 62.0Vdc ± 0.6Vdc for 48V battery
Power saver	Load ≤25W (Enabled on "P/S auto" setting of Remote control)
Charge Mode Specifications:
Nominal Input Voltage	230Vac
Input Voltage Range	196~243Vac
Nominal Output Voltage	According to the battery type
Nominal Charge Current	35A	35A	65A	35A	45A	35A	40A	50A
Charge Current Regulation	± 5Adc
Battery initial voltage	0 –15.7 Vdc (can operate with 0V battery)
Charger Short Circuit Protection	Circuit breaker
Over Charge Protection	Bat. V ≥15.7Vdc/31.4Vdc,beeps 0.5s every 1s & fault after 60s
General Specifications
Safety Certification	CE
Safety Certification	FCC
Operating Temperature Range	0°C to 40°C
Storage temperature	15°C below zero to 60°C
Operation humidity	5% to 95%
Audible Noise	60dB max
Cooling	Forced air, variable speed fan
Size	1012E/1024E/2012E/2024E/2048E/3012E/3024E/3048E:580X315X300MM 4048E/5048E//6048E:755X319X288MM

MODEL (EP3000)	HV Model
	1012E	1024E	2012E	2024E	3024E	4048E	5048E	6048E
Line Mode Specifications:
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac(120VAC selectable)
Low Line Disconnect	184Vac±4%
Low Line Re-connect	194Vac ±4%
High Line Disconnect	265Vac±4%
High Line Re-connect	255Vac±4%
Max AC Input Voltage	270Vrms
Nominal Input Frequency	50Hz/ 60Hz (Auto detection)
Low Line Frequency Re-connect	58+0.3Hz for 60Hz;48+0.3Hz for 50Hz;
Low Line Frequency Disconnect	57+0.3Hz for 60Hz;47+0.3Hz for 50Hz;
High Line Frequency Re-connect	64+0.3Hz for 60Hz;54+0.3Hz for 50Hz;
High Line Frequency Disconnect	65+0.3Hz for 60Hz;55+0.3Hz for 50Hz;
Output Voltage Waveform	As same as Input Waveform
Over-Load Protection(SMPSload)	Circuit breaker
Output Short Circuit Protection	Circuit breaker
Efficiency (Line Mode)	>95%
Transfer Switch Rating	30A
Transfer Time (Ac to Dc)	10ms (typical)
Transfer Time (Dc to Ac)	10ms (typical)
Pass through without Battery	Yes
Max Bypass Overload Current	30A
Invert Mode Specifications:
Output Voltage Waveform	Sine wave
Rated Output Power (VA)	1000		2000		3000	4000	5000	6000
Rated Output Power (W)	1000		2000		3000	4000	5000	6000
Power Factor	0~1.0
Nominal Output Voltage (V)	230Vac
Nominal Output Frequency (Hz)	50Hz ± 0.3Hz
Auto tracking Main Frequency(Hz)	Yes (Following Main first connection)50Hz @48-54Hz ;60Hz @58-64Hz
Output Voltage Regulation	±10% rms
Nominal Efficiency	>80%
Over-Load Protection (SMPS load)	(110% 150% ±10%: Fault (shutdown output) after 20s;

Surge rating (10s)	3000VA		6000VA		9000VA	12000VA	15000 VA	18000VA
Capable of starting electric motor	1 HP		1 HP		2 HP		3 HP
Output Short Circuit Protection	Current limit (Fault after 10s)
Bypass Breaker Size	30A		30A		30A	35A	50A
Nominal DC Input Voltage	12V	24V	12V	24V	24V	48V	48V
Min DC start voltage	10V/20V/40V
Low Battery Alarm	10.5Vdc ± 0.3Vdc for 12V battery;21.0Vdc ± 0.6Vdc for 24V battery;42.0Vdc ± 0.6Vdc for 48V battery
Low DC input Shut-down	10.0Vdc ± 0.3Vdc for 12V battery;20.0vdc± 0.6Vdc for 24V battery;40.0Vdc± 0.6Vdc for 48V battery
High DC input Alarm & Fault	16Vdc ± 0.3Vdc for 12V battery;32Vdc ± 0.6Vdc for 24V battery; 64Vdc ± 0.6Vdc for 48V battery
High DC input Recovery	15.5Vdc ± 0.3Vdc for 12V battery;31.0Vdc ± 0.6Vdc for 24V battery; 62.0Vdc ± 0.6Vdc for 48V battery
Power saver	Load ≤25W (Enabled on "P/S auto" setting of Remote control)
Charge Mode Specifications:
Nominal Input Voltage	230Vac
Input Voltage Range	196~243Vac
Nominal Output Voltage	According to the battery type
Nominal Charge Current	35A	35A	65A	35A	45A	35A	40A	50A
Charge Current Regulation	± 5Adc
Battery initial voltage	0 –15.7 Vdc (can operate with 0V battery)
Charger Short Circuit Protection	Circuit breaker
Over Charge Protection	Bat. V ≥15.7Vdc/31.4Vdc,beeps 0.5s every 1s & fault after 60s
General Specifications
Safety Certification	CE
Safety Certification	FCC
Operating Temperature Range	0°C to 40°C
Storage temperature	15°C below zero to 60°C
Operation humidity	5% to 95%
Audible Noise	60dB max
Cooling	Forced air, variable speed fan
Size	1012E/1024E/2012E/2024E/2048E/3012E/3024E/3048E:580X315X300MM 4048E/5048E//6048E:755X319X288MM

MODEL (EP3000)	HV Model
	1012E	1024E	2012E	2024E	3024E	4048E	5048E	6048E
Line Mode Specifications:
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac(120VAC selectable)
Low Line Disconnect	184Vac±4%
Low Line Re-connect	194Vac ±4%
High Line Disconnect	265Vac±4%
High Line Re-connect	255Vac±4%
Max AC Input Voltage	270Vrms
Nominal Input Frequency	50Hz/ 60Hz (Auto detection)
Low Line Frequency Re-connect	58+0.3Hz for 60Hz;48+0.3Hz for 50Hz;
Low Line Frequency Disconnect	57+0.3Hz for 60Hz;47+0.3Hz for 50Hz;
High Line Frequency Re-connect	64+0.3Hz for 60Hz;54+0.3Hz for 50Hz;
High Line Frequency Disconnect	65+0.3Hz for 60Hz;55+0.3Hz for 50Hz;
Output Voltage Waveform	As same as Input Waveform
Over-Load Protection(SMPSload)	Circuit breaker
Output Short Circuit Protection	Circuit breaker
Efficiency (Line Mode)	>95%
Transfer Switch Rating	30A
Transfer Time (Ac to Dc)	10ms (typical)
Transfer Time (Dc to Ac)	10ms (typical)
Pass through without Battery	Yes
Max Bypass Overload Current	30A
Invert Mode Specifications:
Output Voltage Waveform	Sine wave
Rated Output Power (VA)	1000		2000		3000	4000	5000	6000
Rated Output Power (W)	1000		2000		3000	4000	5000	6000
Power Factor	0~1.0
Nominal Output Voltage (V)	230Vac
Nominal Output Frequency (Hz)	50Hz ± 0.3Hz
Auto tracking Main Frequency(Hz)	Yes (Following Main first connection)50Hz @48-54Hz ;60Hz @58-64Hz
Output Voltage Regulation	±10% rms
Nominal Efficiency	>80%
Over-Load Protection (SMPS load)	(110% 150% ±10%: Fault (shutdown output) after 20s;

Surge rating (10s)	3000VA		6000VA		9000VA	12000VA	15000 VA	18000VA
Capable of starting electric motor	1 HP		1 HP		2 HP		3 HP
Output Short Circuit Protection	Current limit (Fault after 10s)
Bypass Breaker Size	30A		30A		30A	35A	50A
Nominal DC Input Voltage	12V	24V	12V	24V	24V	48V	48V
Min DC start voltage	10V/20V/40V
Low Battery Alarm	10.5Vdc ± 0.3Vdc for 12V battery;21.0Vdc ± 0.6Vdc for 24V battery;42.0Vdc ± 0.6Vdc for 48V battery
Low DC input Shut-down	10.0Vdc ± 0.3Vdc for 12V battery;20.0vdc± 0.6Vdc for 24V battery;40.0Vdc± 0.6Vdc for 48V battery
High DC input Alarm & Fault	16Vdc ± 0.3Vdc for 12V battery;32Vdc ± 0.6Vdc for 24V battery; 64Vdc ± 0.6Vdc for 48V battery
High DC input Recovery	15.5Vdc ± 0.3Vdc for 12V battery;31.0Vdc ± 0.6Vdc for 24V battery; 62.0Vdc ± 0.6Vdc for 48V battery
Power saver	Load ≤ 25W (Enabled on "P/S auto" setting of Remote control)
Charge Mode Specifications:
Nominal Input Voltage	230Vac
Input Voltage Range	196~243Vac
Nominal Output Voltage	According to the battery type
Nominal Charge Current	35A	35A	65A	35A	45A	35A	40A	50A
Charge Current Regulation	± 5Adc
Battery initial voltage	0 –15.7 Vdc (can operate with 0V battery)
Charger Short Circuit Protection	Circuit breaker
Over Charge Protection	Bat. V ≥ 15.7Vdc/31.4Vdc,beeps 0.5s every 1s & fault after 60s
General Specifications
Safety Certification	CE
Safety Certification	FCC
Operating Temperature Range	0°C to 40°C
Storage temperature	15°C below zero to 60°C
Operation humidity	5% to 95%
Audible Noise	60dB max
Cooling	Forced air, variable speed fan
Size	1012E/1024E/2012E/2024E/2048E/3012E/3024E/3048E:580X315X300MM 4048E/5048E//6048E:755X319X288MM

Send your message to this supplier

* From:
* To:

Ms. Tina
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords