Hitachi Tx-1424ad Monitor Replacement/Repair (GBS-8219)

TX-1424AD Hitachi Monitor, GBS-8219 CNC Monitor Converter uses the latest technology to replace your old or damage industrial CRT Monitor with a common monitor. It brings you very good images in a low price.

1. Input Signals: MDA\CGA\EGA\RGB\RGB Sog\RGBS\RGBHV\YPbPr
2. Interface: 5BNC, 9pin\3pin\6pin\14pin\20pin\25pin
3. Horizontal Frequency Rate(H): 12kHz to 40kHz automatically recognized
4. Output: Supports D-15pin standard VGA/SVGA, Resolution: 800*600/60Hz, 640*480/60Hz
5. Interface: D-SUB 15 PIN standard VGA port
6. Power: DC 12V 1.0

Note:
1. YPbPr = YUV
2. Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized.
3. Support RGB and YPbPr
4. Support Interlaced Scanning and Line by Line Scanning.
5. Support Vertical Resolution from line200 to line 600 automatically recognized.
6. Support variable Horizontal Resolution automatically recognized.
7. Support RGBHV (separate sync), RGBS (composite sync), automatically recognized
8. Output resolution: 800*600/60Hz standard VGA or custom-resolution.

MENU
Use to adjustscreen /programming
DC12
Power inputDC12V, 1A
Table 4.1 Definition for Input Channel II:
PIN InputSignal

P1(GND)
Connect to the ground
P2(GND)
Connect to the ground
P3(R)
Connect R(ED) interface of the input device
P4(G)
Connect G(reen) interface of the input device
P5(B)
Connect B(lue) interface of the input device
P6
Undefined(null)
P7
Undefined(null)
P8(H)
Connect H(CS) interface of the input device
P9(V)
Connect V interface of the input device
Figure 4.1 Definition for Input Channel II
Table 4.2 Definition for Input Channel I: BNC
Input Signal
Connection image

Pb\Y\Pr
YPbPr input signal (right image) Interface: Three BNC slot, connected to the corresponding Pb, Y, Pr interface, then Y monochrome port.

Figure 4.2 Analog 3BNC (YPbPr) Input.

R\G\B
RGB Sog input signal (right image) Interface: Three BNC slot, connected to the corresponding R, G, B slot, then G monochrome port.

Figure 4.3 Analog 3BNC (RGB Sog) Input.

R\G\B\S
RGBS CS Composite Sync (right image) Interfaces: 4 BNC slot, connected to the corresponding R, G, B, S I, monochrome then G, S I

Figure 4.4 Analog 4BNC (RGBS CS) Input.

R\G\B\H\V
RGBHV separate sync (right image) Interface: 5 BNC port, connected to the corresponding R, G, B, H, V I, monochrome then G, H, V I

Figure 4.5 Analog 5BNC (RGBHV) Input.
Operation Menu:

Item
Spec.

MENU
-press it to enter into OSD menu -click it once to select and click again to exit the current line

"+"
-click it to move the cursor up -click it to add the value

"-"
-click it to move the cursor down -click it to deduct the value