Chopped Strand Mat

Description

HY301# epoxy resin is the most widely and largest quantity needed ,It is used by two components, resin and curing agent, with the mix ratio of 2: 1 ( Resin : curing agent 2: = 1) . Particularly suitable for the Insulation of mica material, epoxy glass steel insulating board and the reinforcing material. Because of its moderate viscosity, It is particularly suitable as a glass steel anti-corrosion lining material hand lay up method, such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion. HY301 epoxy resin is suitable for the preparation of solvent free or less solvent coating, strong anti-corrosion ability , small environmental pollution.

Application

It is particularly suitable as a glass steel anti-corrosion lining material , such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion.

Characteristics

*Moderate viscosity

*Strong corrosion resistance

*The construction of small environmental pollution

*Manual operation

Operation instructions

1. Clean the Surface of your products, make it clean and dry,

2: evenly mixing the resin and cure agent at ratio of 2:1,

3 Brush the mixed resin on the surface of your products evenly , and then put a layer of Fiberglass , then brush a layer of resin , then repeat the ways above.

Warm tips :

1 It is forbidden to pour back the material into the Original packages even it is unused ;

2 construction to be dry and well ventilated space, Far away from the fire source;

3 stored in a cool dry place,Far away from light , and close the packages well .

4 Don`t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary

Package
20KG/drum package

220KG/drum package

Shelf life

Six (6) months when stored under dry and cool place by original package under 25℃

Description

Glass Fiber cloth is compiled by untwisted direct roving with plain weave, is mainly for unsaturated polyester resins , vinyl resins , epoxy and phenolic resins , etc.

Application

Widely used for hand laying fiberglass products : such as the hull , automobile, airplane , plates, sports and entertainment facilities , fiberglass products, sanitary ware, pipe irrigation , cooling towers and so on.

Characteristics

*Less Hairy

*High penetration speed

*Uniform thickness

*High mechanical strength

Warm tips :

1,General conventional glass fiber filaments is 9-13 microns in diameter , glass fiber below 6 micron belongs to floats , can be sucked directly into the lungs, can cause respiratory disease, so you should pay special attention to six microns or less glass fiber cloth, is generally imported. The one who is under professional production operations must wear masks. If contact frequently, may be bothered into the lungs, causing pneumoconiosis .

2, if it is physically touch the glass fiber, people with allergic skin will occur allergic itching, however, generally speaking, it is not serious. It will occur small rash on allergic skin, please take some anti allergy medicine

3, if it is stick on clothes and difficult to remove, just pat it under wind for several times or clean & dry it

Package

Each volume sets wrap a transparent plastic bag , then put into cartons. If you have special packaging requirements , we can offer in accordance with customer requirements. 1x20 foot container can pack about 10 tons