UHB Low Pressure Electric Centrifugal Pump , Industrial Cor

Low Pressure Electric Centrifugal Pump , Industrial Corrosive Liquid Pumps

Model meaning:

UHB code for polyethylene material pump

Z impurity mortar

K Semi-shrouded impeller

80 The inlet diameter is 80mm

50 The flow rate is 50cmb per hour

20 The pump lift is 20m

Applied Range:

1. The pump is used for diluted, acid, waste water, sea water, fluosilicic acid with silica gel, phosphoric slurry

2. Nonferrous metal, it is also can be used in various acid liquid for lead, zinc, gold, silver, copper, manganese, cobalt, rare-earth, corrosive slurry, electrolyte.

3. Various sulfuric acids, hydrochloric acid, oil clean liquid.

4. Hydrochloric acid, electrolyte;

5. Water-treatment: pure water, waste water(leather waste water, galvanized waste water, electric waste water, paper making waste water, food waste water, plating waste water) etc.

6. Iron and steel industry;

7. Can be used in alkalinity, acid or corrosive liquid.

Technical Parameter:

1. Caliber: DN25-DN250mm

2. Capacity:3-600m3/hr

3. Head:12-75m

4. Rotate speed:2900 r/min; 1450 r/min; 960r/min;

5. Work temperature: ≤100°C

6. Viscosity: ≤150mm2/s

7. Pressure:≤1.0Mpa

8. Shaft seal: ZK Series (K type power seal)

ZJ Series (Mechanical seal)

9. Motor power: 4-132Kw

Sinofine UHB-ZK corrosion-resistant mortar pump is a single-stage single-suction cantilever centrifugal pump adopt steel ultra high molecular weight polyethylene, the material is corrosion-resistant engineering plastics international generation.Has strong corrosion resistance and wear resistance of transcendence. The pump is widely used in temperatures of 100 degrees, solid content (hard soft particles) does not exceed 40% of any concentration of acid, alkali, salt, strong oxidizer, organic solvent such as media delivery.

Structure and characteristics:

(1) corrosion resistant, a multi-purpose pumps, acid and alkali supernatant slurries.

(2) pump for the structure of high molecular weight polyethylene lined, lining thickness is 8 ~ 20mm, the pump liner patent application of network technology, shells, and other similar pumps, compared with a lining layer of heat distortion properties, resistance to cracking , anti-loss, high temperature strengths.

(3) half-open impeller, closed two, according to state media optional.

(4) Seal: K-type dynamic seal, G3-type mechanical seal.

Medium: 75% concentration sulfuric acid, 30% nitric acid, various concentrations of hydrochloric acid, caustic soda, only for clear liquid but also for slurry.

Application:

1) Acid, liquor, sewage, water, fluorine-containing silicone silicate, phosphoric acid slurry and other media delivery.

2) non-ferrous metal smelting industry: especially suitable for lead, zinc, gold, silver, copper, manganese, cobalt, rare earth metals hydrometallurgy a variety of acid, corrosive slurry, slurry (with filter use) electrolyte, water and other media delivery.

3) chemical and other industries: a variety of sulfuric acid, hydrochloric acid, alkaline, clear liquid or slurry oil jobs. Titanium dioxide, iron Pink production of dyes, pigments, non-metallic mineral processing industries.

4) The chlor-alkali industry: hydrochloric acid, caustic, electrolyte and so on.

5) water treatment industry: water, high water, sewerage (sewage leather, electroplating wastewater, electronic sewage, paper mill wastewater, textile wastewater, food wastewater, sewage, pharmaceutical industry, sewage, etc.).

6) iron and steel enterprises: pickling system sulfuric acid, hydrochloric acid positions, with the impurities of the sewage.

7) wet desulfurization circulating pump: simultaneous application of alkaline, acidic, corrosive job.

8.) Coal industry, coal chemical industry in the corrosive liquids, coal slurry transportation; washed coal with pump.