Brushing RTV-2 Molding Silicone

Brushing RTV-2 molding silicone

1.Application of Brushing molding silicone rubber : 

Brushing molding  silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation

2.Operation instruction of Brushinng silicone rubber :

    Brushing molding silicone rubber is composed of two components.Component A is white flowing liquid while component B is the curing agent.

Steps:

   a.take silicone rubber of 100g and add 2% curing agent for  mixing evenly.

   b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.

   c.After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.

Note: brushing molding silicone rubber is used for pouring or brushing technique. That is to say,

firstly fix the product or sole model to be duplicated onto a plane plate,

then enclose the plane frame with wooden plates to prevent the leakage of the silicon ,

thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model,

at last  brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.

3.Storage and Precautions of Brushing molding silicone rubber :

Brushing molding silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

Need any help on silicone rubber, please feel free to contact Ms Debbie:

office no. :0086-755-89948006
Mob: 0086-18938867516
Skype: kimberly_802
Email: hyyf (at)szrl(dot)net  

You can also send me E-mail by scanning  2-Dimensional Bar Code below: