HY-E625 Liquid Silicone for Insoles,rtv silicone,silicone moulds

HY-E625 Liquid Silicone for Insoles,rtv silicone,silicone moulds

Get Latest Price

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Product Description

Product Details

Basic Specification

hs code	39100000
Application	Molding silicone rubber for shoe sole mold
Color	any color is avalible
appearance	liquid material
operation way	casting
Eco-Friendly	Yes
Test Report	SGS

Detail Description

HY-E625 Liquid Silicone for Insoles

HY-E625 Liquid Silicone for Insoles is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the E625# A and E625# B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles.

Application:
HY-E625 silicone rubber is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.

Specification:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures

Typical Physical Properties

Product	E-625
Appearance	Translucent
Hardness(shore A)	25±2
Mix ratio(A:B)	1:1
Mixed Viscocity（mPa.s）	8000±2000
Tensile strength (kgf/cm2)	45±5
Tear-strength (kN/m)	20±2
Elongation（%）	450±50
Pot life/working time (mins)	30-40
Curing time/setting time (hrs)	3-4hrs(25℃) 110-20mins(60℃)
Shrinkage rate （%）	0.1

(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)

Using instructions:
1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing, it cures by heating up the temperature when pouring into the mold.
3. The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.

Notice :
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.

SHELF LIFE:
8-10 months when stored under 24℃ in original unopened packages.

PACKAGE:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

Need any help on silicone rubber, please feel free to contact Ms Maggie:

Tel:86-755-89212369
Mob:86-13828847574
E-mail: maggie822014(at)gmail(dot)com
Skype:maggie.cao82

Additional Information

Payment Terms	L/C, T/T, Western Union
Minimum Order	200KG
Lead Time / Delivery Time	3 Day(s)
Sample Available	YES
Delivery Details	By sea
FOB Port	Shenzhen
Loading Info	FOB, CNF or CIF
Packing Info	5kg/drum, 20kg/drum, 25 kg/drum, 200kg/drum
Target Market(s)	North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Middle East & South Asia, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East

Send your message to this supplier

* From:
* To:

Mr. Kaka
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords