
Screen Printing Silicone Ink for T-Shirt Liquid Silicone Coating
Your message must be between 20 to 2000 characters
Contact NowBasic Specification
hs code | 39100000 |
---|---|
sample | free |
application | silicone rubber for trademark |
Color | Any color is available |
hardness | silicone oil is available for adjust it |
Eco-Friendly | Yes |
Test Report | SGS |
Detail Description
Screen printing silicone Ink for T-shirt liquid silicone coating
In order to substitute the PVC ink people now use, which pollutes environment, we developed theenvironment friendly silicone ink, which does no harm to human body. When test and destroy ester of phthalate acid of PVC INK, producing outburst material will cause environmental problems. So PVC ink products are prohibited to use in America and Europe. The silicone ink our company produced is developed based on safety design. The silicone ink will be adhered on textile fiber well after being cured and forms elastomer of silicone . Therefore, it is its merit that it produce high tear strenth, which will create high quality printing effect. It is difficult for the silicone ink we now using to fluidity and cure quickly. So there are a lot of problems during application. However, the silicone ink our company produced not only makes up forthese shortcomings, but also activates the merits of heat resistance, recovery capacity, flexibility, velvet, resistance to oil, solvent, and other chemical etc, which are only possessed by silicone elastomer. That turns the harm to human body caused by the organic solvent into environment friendly, innoxious ink, which become highest quality textile elastic silicone ink.
Specification:
-Low shrinkage(< 0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Datasheet:
Model |
TB0330 |
Appearance |
Transparent |
Hardness(shore A) |
30± 2 |
Mix ratio(A: B) |
1:1 |
Viscosity(mPa. S) |
60000~100000 |
Tensile strength(Mpa) |
4.6 |
Tear-strength(KN/m) |
19± 2 |
Elongation(%) |
360 |
Pot life/working time(25° C) |
12-24 hours |
curing time(100-120° C) |
10~20(mins) |
Operation introduction:
1, Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2, It can be cured by heating with 100~150 degree, the curing time will be 5~10 minutes.
SHELF LIFE:
8-10 months when stored under 24° C in original unopened packages.
PACKAGE:
If ratio is 1:1 : Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 : Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Need any help on silicone rubber, please feel free to contact Hugo:
TEL:086-755-89948019
FAX:086-755-89948030
MOBILE:086-13428680288
SKYPE: hugo.chen007
Website:www(dot)szrl(dot)net
E-MAIL:hugochen014(at)gmail(dot)com
Additional Information
Payment Terms | L/C, T/T, Credit Card, Western Union, Others |
---|---|
Minimum Order | 100kgs |
Lead Time / Delivery Time | 3 Day(s) |
Sample Available | YES |
Delivery Details | By sea |
FOB Port | Shenzhen |
Loading Info | FOB, CNF or CIF |
Packing Info | 5kg/drum, 20kg/drum, 25 kg/drum, 200kg/drum |
Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Latin America, Japan & Korea, Middle East & South Asia, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |
Related Keywords