electronic potting compound silicone rubber for LED light engine

Typical Application:

electronic potting compound silicone rubber for LED light engine is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Silicone Rubber Electronic Material for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.

Description:

electronic potting compound silicone rubber for LED light
engine is a newly insulating material silicon of silicon compounds. It cures without heat, corrosion and just with little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.  

Features:

1. No toxicity, solventless, no odor and no cure by-product.
2. Equal amount of mixing ratio, good fluidity, easy processing.
3. No significant exotherm or shrinkage during curing.
4. Flexible curing schedule, can be cured at room temperature (R.T.) or at elevated temperature.
5. Very stable to changes of temperature, stability over wide temperature range (-50 to 200 ^oC).
6. Good fire resistance, UL94V0 approval.
7. Excellent thermal conductivity.
8. Excellent dielectric properties for maintaining and protection of existing electrical insulation requirements.
9. Excellent weather resistance and waterproof property for protection from moisture and dust contamination.
10.Relative easier removal benefits to repair of electrical/electronic devices.

Picture show: 

Technical Parameters:

Precaution:

1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usableIn this case however,the properties required for the intended use must be checked for quality assurance reasons

Operation way:

1.Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Certification:

ISO9001: HK05/01358 
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8

Package:

20Kg/pail (Part A10Kg + Part B10Kg)

About us:

For more information, please fell free to ask Mr. Tony 

Tel:86-755-89948006
Mob:86-18938867516
e-mail: hyi(at)szrl(dot)net
Skype: kimberly_802