5050 White Waterproof SMD LED Strip

1.  Simple introduction

YLL-FS5050-60RGB adopts 60pcs of 5050 RGB SMD LED as its light source. It is made of flexible copper board and silica gel. It has stronger brightness than LED pixel Strip. But it can not have so many expressive color changing effects. The controller system can create the effects as following: Seven Color Flash, Leaning Color Fade, Full Color Fade, Loop, Seven Fixation Color. Each 3 LEDs as one unit can be cuttable to get your desired length which can be connected by wires and Silica gel.

 2.   Features

1. This product adopts a kind of super flexible PCB as base which makes soldering points is steady. There   are 3 chips in each 5050 RGB SMD LED. The LEDS are evenly arranged on the board.
2. It can create 10 types of effects
3. Every three LEDs as one unit can be cuttable
4. Our special waterproof craft makes the product completely waterproof
5. Self-adhesive 3M label in the back, fix it firmly as your requirement.
6. The 5050 RGB SMD have excellent color blending, high intensity, large viewing angle, good quality.
7. The PCB size can be custom-made according to the customer’s requirement
8. End of strip is soldered with flying leads for customer wiring use.
9. 5 meters per roll.
10. Each 5 meters need 12vdc and 100watts of transformer.  
11. Controller: YLL-CON-RGB

 3.  Specification

Size:  1000mm*10mm*2mm  

Q\'ty/m:  30leds & 60leds

Work current:  0~600mA  & 1200mA   

Beam angle:  120°

Emitting color:  RGB,  Red, Green, Yellow, Blue, White

Protection class:  IP65 & IP67 & IP68

Work power:  0~7.2W  & 14.4W per meter

Work voltage:  DC12V

Work temperature:  -20+60

Storage temperature:   -20+80

Testing temperature:  25

 Note: It need to connect transformer, controller and magnifier. 

Can create Seven Color Flash, Leaning Color Fade, Full Color Fade, Loop, Seven Fixation Color

 4.  Attention

1. Pls using according to the requirements, pls assure the voltage is DC 12V

2. The installing surface need be clean, dry, even

3. The fixing must not be tied to edging place

4.  Must not press and hit the products

5. It can be cutted, must be cutted according to shearing lines

6. Satic electrictiy has some disruptive, during using, pls pay attention to wear  

antistatic gloves