hepa air purifier Intelligent ozone air purifier water air purifier

air purifiers   ozone air purifier   ionic air purifier   hepa air purifier

water air purifier

intelligent air purifier with remote control

Specifications

TM021 purifier manual (Reference)

 First, the principle:

The main effect of the purifier to remove indoor smoke, formaldehyde, benzene, TVOC, ammonia, part of the bacteria and harmful, and the smell of gas by photoelectric ion electrostatic field, UV, photocatalyst, a small amount of ozone to kill harmful gases into the machine, to achieve the purpose of purifying the air.

Principle :

Second, the purification technology applications

1.Photoelectric ion high-voltage electrostatic disinfection;

2 new Photocatalyst purification

3, high intensity ultraviolet UV-C sterilization

4, anion fresh air

5, ozone disinfection

Three main functions:

1, the decomposition of organic matter such as benzene, formaldehyde

2, clear the odors, smoke and other odors

Remove volatile compounds TVOC

3. humidification

Fourth, the main features:

1, no supplies, just cleaning can be used again;

2 .can automatically detect and display the indoor air quality, and automatically adjust the purification rate

3, easy to disassemble without tools;

4, open the automatic power-off panel, good safety performance;

5, sterilization and disinfection functions independent;

6 wall;

7, VFD display;

8, colorful lighting options, to make the product more dynamic;

9, child lock protection device to improve security;

10 displaying indoor timely temperature;

11, humidifying function can be free to choose, more humane;

technical parameters:

Input voltage: 220V 50Hz

The electrostatic end of voltage: DC4000 ~ 8000V

Rated Power: 55W

Purification efficiency: 70% ~ 98%

Noise: less than or equal to 55dB

Maximum air flow: 370m3 / h

Effective application of space: 40-70m2

Anion: 24x 107PCS

Net weight: 8.5kg, GW: 10kg

Package size; 470x260x580mm

Fifth, the host instructions:

1, the machine out on the appropriate position (proposed on the location of about one meter above the ground);

2, directly plug into the appropriate socket (without the same like other similar purifier first open the front panel); indoor air quality, the machine automatically detects the red light on the panel ring and flashing (panel ring the red light has been lit and flashing, room air quality is relatively poor, you need to boot the purification and disinfection); relatively normal if the red light flashes stopped, blue lights, indicating that the indoor air quality, just low speed machines, or do not run ; as long as the machine is powered on, this detection capability has been a start state; unplug the power cord, this feature will stop.

Notes:

1, the product before cleaning or moving, be sure to disconnect the power supply;

2. Cleaning electrostatic films to be careful graze, so as not to hurt your hands or to undermine the electrostatic piece;

3. Electrostatic piece should be clean and in good condition, securely installed, can not be used;

4 disassemble panel \"Didi\" sound, disconnect the power, unplug the power cord immediately;

5, after cleaning the boot can not run, it may be good contact at the micro-switch, please re-install the panel, so the panel back to withstand the micro switch can;

6, coarse filter layer and photocatalyst washing can clean, but it must be thoroughly dried before installation, or can not use or no effect;

Warning: Do not place the machine on high-temperature, high fever, and contain flammable gas, explosive environment. Do not produce a lot of smoke and dust environment use.

If other faults, please contact me.