Interlligent Video Doorbell With Stand-by time 1000 hours Manufacturer

                       Our Special Events

Detailed Product Information

First of all, this product originality redresses the defect of “hearing the voice but without seeing the man” of traditional doorbell. It has  3.5inch LCD screen.  And it also suit to the door with door hole: 14-40mm, door thickness 30-80mm. Both the aged and children at home can easily operate and clearly identify the outdoor visitor, helping us to improve the home security. Its automatic photo-taking and video-recording functions enable you not to miss any visitors during your travelling outdoors.

Fashion colors in your favor

Advantages from those Traditional  ones

Parts of Structure

Parameters

Battery & Charge

• When the battery is at low power, the battery level indicator will flash, and meanwhile the buzzer will make “tick-tock” prompt tone, charge the machine immediately. 
• This product can be charged by charger or USB data line connecting to the computer, or remove the battery to charge it, this unit can work while charging.
•  Battery type: this unit uses high quality lithium battery; please select the designated BP-6M battery in case of replacement.

Note: When the battery level is low, photo, video and USB flash disk functions cannot be realized

Terms

• Delivery time:10-45days after receiving deposit
• Delivery place: Shenzhen or Hongkong
• Sample freight fee: About USD25.00-USD60.00

Certificate: CE/Fcc/RoHS

Installation Guide --- it\'s easy to DIY

• The intelligent monitoring doorbell consists of outdoor machine, host machine, holder, indoor set and flexible connection, and fixed at the peephole of security door using mounting screws.
• This model is applicable to hole of door: 16.5-40mm, thickness of door: 30-80mm. The general assemble drawing is shown in Diagram 1: 

Installation Steps

• 1. Thread the outdoor unit (with flexible connection) through the peephole of security door, and also the flexible connection. Put the outdoor unit in a correct place with keystrokes at downside and camera hole at upside. Peel off the bottom side of the double-side adhesive tape, and stick it on the door lightly in the way as shown in Diagram 2:

2. Connect the flexible connection with connection base of host machine in the way as shown in Diagram 3.

• Open the black cover of connection base upward.
• Insert the metal side of flexible connection interface into the connection base downward.
• Depress the black cover of connection base backward, you can hear a clicking sound.
• Lightly pull the flexible connection to make sure it is firmly connected with the connection base.

  3. Move the screw hole on host machine holder to a corresponding position on outdoor unit, if the flexible connection is slightly long, push the central part of the connection line back into the door hole to make the naked part firmly cling into the trunking of host machine, peel off the body paper of the double faced adhesive tape, thread M4 screw bolt through the host machine holder to the outdoor unit, and then tighten the screw bolt in the way as shown in Diagram 4

4. Insert the host machine with battery into the host machine holder, and then it can be normally used, as shown in Diagram 5

This is Indy Pan from HongJi.  Contact me at any time.  Your questions, our pleasure.