T5 LED Tube light fixtures/UL/TUV

T5 LED Tube Light
T5 LED Tube is new indoor lighting product. With special circuit design and heat dissipation, the T5 LED Tube Light can achieve high luminous efficacy, energy saving, long lifespan, high lumens, no flickering and high CRI. Applied with new type of LED, the tube has the same or even more light output compared with fluorescent tube without reflector or flick when starting. For example, our 8W, 16W, 20W T8 led tube light fixtures can replace 16W, 32W and 40W traditional fluorescent tubes and do not need ballast or starter.

Part No.
  Length
  Voltage
(Vac) Frequency
(Hz) Input current
(A) Rated Power
(W) Efficiency
 
PXT8-8W 0.6M AC85-265 V 50/60 Hz 0.1 A 9W ＞85%
PXT8-16W 0.9M AC85-265 V 50/60 Hz 0.18 A 12W ＞85%
PXT8-18W 1.2M AC85-265 V 50/60 Hz 0.2 A 16W ＞85%
PXT8-24W 1.5M AC85-265 V 50/60 Hz 0.25A 20W ＞85%

Application
     Home, villa,hotel,beauty parlor,coffee house.,supermarket, museum

2  Packing
     One tube with one box.                     one master carton contain 25  inner boxes

                
Part No. Length Size（mm） Size（mm） 
NW（kg） GW(kg)
PXT8-8W 0.6m 625(L)X38(W)X38(H) 645(L)X235(W)X235(H) 0.24 8.5
PXT8-16W 0.9m 930(L)X38(W)X38(H) 950(L)X235(W)X235(H) 0.32 11
PXT8-18W 1.2m 1235(L)X38(W)X38(H) 1255(L)X235(W)X235(H) 0.43 15
PXT8-24W 1.5m 1535(L)X38(W)X38(H) 1555(L)X235(W)X235(H) 0.51 18

2 How to install

l Turn off the electricity supply before installation .
l Make sure the circuit of the base is as following A2 and B2.For old circuit originally for conventional T8/T10 fluorescent,please following the illustrated steps to adjust djust the circuit as follow .
  
A1
B1
 

A2
B2

l .For the figure A1 circuit, take out the electronic ballast, reinstall the new circuit(shown as figure A2);
l For the figure B1 circuit, take out starter and the inductance ballast, reinstall the new circuit(shown as figure B2);
l After adjusting the circuit , install the LED tube in the same way as installing the traditional fluorescent tube light. Turn on the power supply of the base to check whether the tube light is working properly or not.