
1.2M UL T8 LED Tube light,SMD Light Tube Light
Your message must be between 20 to 2000 characters
Contact NowBasic Specification
Life | >50000hours |
---|---|
Package | Yes |
Tube Diameter | T8 |
Color Tones | Warm Color |
Length | 120cm |
Lamp Base | G13 |
Light Source Chip | LUXEON |
Illuminant | SMD |
Power | 16W |
Voltage | 220V |
Detail Description
Features
1.Illuminant: ultra-bright white LED.
2.Light color: natural white.
3.PC cover: frosted
4.Installation;Ceiling
5.Instant response , no strobe light wave. High efficiency , low power consumption.
6.The integrated constant current power supply ensures steady performance and long lifespan.
LED tube light T8 16W
Model:PXT8-16W
Products advantages:
1. Energy saving up to 70%,high intensity
2. Good light quality and good heat dissipation
3. Special different view angles mixing lighting design
4. Instant on, no warm up time required
5. High efficiency, constant current driver, with heat protection system can work under unstable voltage
6. Special circuit design, each LED work separately, avoiding the single broken LED influence problem
7. No UV or IR radiation in the beam, mercury free.
8. Anti-shock, anti-moisture.
9. No hazard of mercury or lead entering the environment
10. CE, RoHS 、UL certified.
Product Application
◆ Apply to all types of living spaces, best choice to replace fluorescent tubes, such as: homes, villas, hotels, guest houses, beauty salons, coffee shops, can also be used for the lighting of shopping malls, museums and other places.
◆ Certificates: UL / TUV / CE /FCC
1. Application
Home, villa,hotel,beauty parlor,coffee house.,supermarket, museum
2. Packing
One tube with one box. one master carton contain 25 inner boxes
3.How to install
1>Turn off the electricity supply before installation .
2>Make sure the circuit of the base is as following A2 and B2.For old circuit originally for conventional T8/T10 fluorescent,please following the illustrated steps to adjust djust the circuit as follow .
3> For the figure A1 circuit, take out the electronic ballast, reinstall the new circuit(shown as figure A2);
4> For the figure B1 circuit, take out starter and the inductance ballast, reinstall the new circuit(shown as figure B2);
5> After adjusting the circuit , install the LED tube in the same way as installing the traditional fluorescent tube light. Turn on the power supply of the base to check whether the tube light is working properly or not.
Cautions
1. In order to ensure the product work properly, please use the power supply within indicating votage range.
2. Please follow the correct installation steps to install the product.
3. Please turn off the power supply for the base to avoid the risk of electric shock while installing or uninstalling the product.
4. Do not use the products in the high humidity or dust environment, including but not limited to the following environment: bathroom, sauna room, polishing workshop.
5. Please install the LED tube in the base of standard size.
6. Do not look directly at LED light source for a long time,becauser the high-intensity light source may cause harm to eyes.
7. Please contact a qualified electrician for repair services when you find the following problems ,and do not disassemble the tube light:
Electronic components are exposed to rain or other liquids splash.
Products release smell gas, abnormal sound and unusual flash.
The cover is broken .Debris goes into the base or the tube.
The LED tube is not in the correct installation location of the base.
Additional Information
Payment Terms | L/C, T/T, D/A, D/P, Money Order, Others |
---|---|
Minimum Order | 1 |
Lead Time / Delivery Time | 7 Day(s) |
Sample Available | YES |
Delivery Details | Cautions1. In order to ensure the product work properly, please use the power supply within indicating votage range.2. Please follow the correct installation steps to install the product. |
Loading Info | Please turn off the power supply for the base to avoid the risk of electric shock while installing or uninstalling the product.4. Do not use the products in the high humidity or dust environment, in |
Packing Info | Electronic components are exposed to rain or other liquids splash. Products release smell gas, abnormal sound and unusual flash. The cover is broken .Debris goes into the base or the |
Target Market(s) | Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Mainland China, North America, Central & Southern Asia, Southeast Asia, Western & Southern Europe |
Related Keywords