Excellent quality led t8 röhre withCE RoHS FCC PSE approval

Product Technical Parameters:
1) Material: PC+Aluminum
2) Color: CW/WW/PW/NW
3) Input Voltage: AC110-220V(non-isolated power supply)AC85-265V(isolated power supply), 50-60HZ
4) LED quantity:144pcs 2835SMD
5) Length: 26*1798mm
6) Luminous flux: 2700-3200LM
7) Color temperature: PW:6000-6500K, NW:4000-4500K,WW:2800-3200K,CW:>7000K
8) P F: ≥0.85
9) IP: 22
10) Shape: oval.
11) Short Current: <5mA
12) Work Humidity: <90%RH
13) Environment temperature: -10-50°C
14) Certification: CE, ROHS, PSE, FCC C-TICK
15) Warranty: 3 years

2. HC-LED led t8 röhre features:

1. Environment friendly and energy saving, long lifespan, high brightness, good color rendering and low power consumption
2. High quality LED as the light source,such as\"CREE\"\"OSRAM\"\"NICHIA\"\"EPSTAR\" and some others
3. Using aluminum heat sink base and aluminum PCB to dissipate more heat
4.Widely used for indoor lighting, hotel, restaurant, shops, business lighting, home lighting, etc.
5. Available for clear, milky and diffusion cover
6. CE RoHS PSE C-Tick FCC Approval
7. Easy to install and use


3. Services:

1. Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3. OEM&ODM, we can help you to design and produce any of your customized lightings . 
4. Distributorship are offered for your unique design and some our current models
5. Protection of your sales area, ideas of design and all your private information.



4. Installation Instructions:

1. Cut off the original line power before installation
2. LED tube lights can be installed directly in the T8 or T10 bracket(remove the starter)
3. If there is an electronic ballast, it can\'t be installed directly, you should get rid of eletronic ballast
4. Non-professionals should not disassemble the LED lamp by themselves
5. If there is any unusal problem when using, please contact us. The product couldn\'t be open optionally, or no warranty for it.

 
A .When installing LED tube to the hanger with inductive ballast:
1. Take out the starter from the hanger
2.Install the LED tube into the hanger directly(Refer to the following drawing)

To save energy, you are recommended to remove the inductive ballast. Or there will be 1-2w electricity consumption.

B. Installing LED to the hanger with Electronic ballst:
1.Take down the electronic ballast from the lamp hanger
2. Connect the wire. (Refer to the following drawing)
3. Install the LED tube into the hanger directly.




5. Usage Instructions:

1. Take out package and check it carefully. If there is any problem, contact us directly.
2.Read the lable paremeter carefully to make sure:
     the LED tube parameter is match with the fixture paremeter
     the connect way is the same with the tube connect way(pay attention to        double-end currency input and single-end currency input tube)
3. Read the instruction carefully before install it.
4.Don\'t store tubes in humidity environment



6. Applications:


 

7. More Products:

 


 

Shenzhen H&C led  tube for led office lighting, welcome to browse the product information.