t8 led tube 12W with CE ROHS FCC PSE C-TICK led lighting market
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Basic Specification
| PC Cover | Milky /Clear/Stripy Cover |
|---|---|
| CRI | 80 |
| Package | Carton |
| Housing Lampshade | PC+Aluminum |
| Luminous Efficiency | 100lm/W |
| Life | 50000Hs led lighting market |
| Package | Yes |
| Light Source Chip | Epistar |
| Tube Diameter | T8 |
| Color Tones | Warm Color |
| Length | 120cm |
| Lamp Base | G13 |
| Illuminant | SMD |
| Voltage | 110-220V |
| Power | 12w led lighting market |
Detail Description
1. Details:
2. HC-LED features:
1. Environment friendly and energy saving, long lifespan, high brightness, good color rendering and low power consumption
2. High quality LED as the light source,such as\"CREE\"\"OSRAM\"\"NICHIA\"\"EPSTAR\" and some others
3. Using aluminum heat sink base and aluminum PCB to dissipate more heat
4.Widely used for indoor lighting, hotel, restaurant, shops, business lighting, home lighting, etc.
5. Available for clear, milky and diffusion cover
6. CE RoHS PSE C-Tick FCC Approval
7. Easy to install and use
3. Services:
1. Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3. OEM&ODM, we can help you to design and produce any of your customized lightings .
4. Distributorship are offered for your unique design and some our current models
5. Protection of your sales area, ideas of design and all your private information.
4. Installation Instructions:
1. Cut off the original line power before installation
2. LED tube lights can be installed directly in the T8 or T10 bracket(remove the starter)
3. If there is an electronic ballast, it can\'t be installed directly, you should get rid of eletronic ballast
4. Non-professionals should not disassemble the LED lamp by themselves
5. If there is any unusal problem when using, please contact us. The product couldn\'t be open optionally, or no warranty for it.
A .When installing LED tube to the hanger with inductive ballast:
1. Take out the starter from the hanger
2.Install the LED tube into the hanger directly(Refer to the following drawing)
To save energy, you are recommended to remove the inductive ballast. Or there will be 1-2w electricity consumption.
B. Installing LED to the hanger with Electronic ballst:
1.Take down the electronic ballast from the lamp hanger
2. Connect the wire. (Refer to the following drawing)
3. Install the LED tube into the hanger directly.
5. Usage Instructions:
1. Take out package and check it carefully. If there is any problem, contact us directly.
2.Read the lable paremeter carefully to make sure:
the LED tube parameter is match with the fixture paremeter
the connect way is the same with the tube connect way(pay attention to double-end currency input and single-end currency input tube)
3. Read the instruction carefully before install it.
4.Don\'t store tubes in humidity environment
6. Applications:
Special design of end-cap:
| Specification | |
| Item No. | HC-T8-120-12W |
| Module Spec. | |
| Ttems | Description |
| Housing Lampshade | PC+Aluminum |
| Demension | 26*1198mm |
| LED Type | SMD 2835LED |
| LED Qty. | 96pcs |
| Base Type | G13 |
| Electric Spec. | |
| Input voltage | AC85-265V |
| Power Supply Frequency | 50-60Hz |
| Rated Power | 12W |
| Average Life Span | 50000H |
| CRI | 75-80 |
| PF | >0.9 |
| Optical Spec. | |
| Lighting color | Pure White6000-6500K Nature White4000-4500K Warm White2800-3200K Cold White >7000K |
| Luminous Flux(lm) | 1100-1400lm |
| Color Temp. | 3000K/4000K/6400K |
| Operating Temp. | -10℃-50℃ |
| Case Temp. | MAX.60℃ |
2. HC-LED features:
1. Environment friendly and energy saving, long lifespan, high brightness, good color rendering and low power consumption
2. High quality LED as the light source,such as\"CREE\"\"OSRAM\"\"NICHIA\"\"EPSTAR\" and some others
3. Using aluminum heat sink base and aluminum PCB to dissipate more heat
4.Widely used for indoor lighting, hotel, restaurant, shops, business lighting, home lighting, etc.
5. Available for clear, milky and diffusion cover
6. CE RoHS PSE C-Tick FCC Approval
7. Easy to install and use
3. Services:
1. Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3. OEM&ODM, we can help you to design and produce any of your customized lightings .
4. Distributorship are offered for your unique design and some our current models
5. Protection of your sales area, ideas of design and all your private information.
4. Installation Instructions:
1. Cut off the original line power before installation
2. LED tube lights can be installed directly in the T8 or T10 bracket(remove the starter)
3. If there is an electronic ballast, it can\'t be installed directly, you should get rid of eletronic ballast
4. Non-professionals should not disassemble the LED lamp by themselves
5. If there is any unusal problem when using, please contact us. The product couldn\'t be open optionally, or no warranty for it.
A .When installing LED tube to the hanger with inductive ballast:
1. Take out the starter from the hanger
2.Install the LED tube into the hanger directly(Refer to the following drawing)
To save energy, you are recommended to remove the inductive ballast. Or there will be 1-2w electricity consumption.
B. Installing LED to the hanger with Electronic ballst:
1.Take down the electronic ballast from the lamp hanger
2. Connect the wire. (Refer to the following drawing)
3. Install the LED tube into the hanger directly.
5. Usage Instructions:
1. Take out package and check it carefully. If there is any problem, contact us directly.
2.Read the lable paremeter carefully to make sure:
the LED tube parameter is match with the fixture paremeter
the connect way is the same with the tube connect way(pay attention to double-end currency input and single-end currency input tube)
3. Read the instruction carefully before install it.
4.Don\'t store tubes in humidity environment
6. Applications:
| 1) Indoor lighting (living room, bedroom, kitchen, washroom) |
| 2) Subway, bus, station, parking lot, tunnel, lobby |
| 3) Office building, shops, shopping mall, supermarket,production line lighting in factory |
| 4) School, hospital, exhibition hall, hotel, commercial complex |
| 5) Advertisement lighting and decoration |
7. Packing Specifications:
Delivery Time: 3workdays for sample, 5-7workdays for batches.
8. Delivery:
For your samples order, we usually deliver by FEDEX, DHL, UPS, or by air transportation
If more than 40 cartons, we recommend sea shipment to save transportation fee
9. Why chose us?
- Brand advantage: We pay attention to shape our own brand from the beginning, to enhance the brand reputation and popularity, to obtain many honors in the industry.
- Product Advantage: In order to the development of the enterprise and also the LED lighting industry. HC R&D continuously research and innovate, develop more new products.
- Innovation advantage: The aggressive exploration and innovation to research more functional products, meet customers\' different requirements, make the company a leader of LED lighting industry.
- Service advantage: HC people committed to development of LED lighting industry with our sincerity and fortitude, we always adhere to “Integrity management, People-oriented” with respect to our aim, win the support and trust of the majority people in LED industry at home and abroad.
Special design of end-cap:
- Design of removable and rotatable end-cap provides quick replacement
- Lighting angle can be ajusted according to customers\' needs
- Designed by our R&D team, and easy to adjust
- Of inner-transformer by pressing the switch on the end caps easily.
Top Quality PC covers:
1. Clear, milky white and difussion cover available
2. PC cover is of high transmittance, for difusion cover when lighted on, LEDs are invisible.
3. Normally, lighting efficiency is very even.
Great Lighting source:
we choose high quality led chip of bigger size: 14*28mil.
the lighting space is bigger, and the whole led tube lumen is higher.
Low light degradation:
1. Our led Production Process adopts new technology, less than 0.3% in the first year,(according to our 3years warranty)
High quality power supply:
1. We have our own R&D team to Research the driver solution: isolated power supply and non-isolated power supply.
2. PF can reach more than 0.95.
Certifications:
1. CE/LVD and CE/EMC Approval in European market, TUV Approval in German Market.
2. Rosh FCC C-Tick Approval to satisfy customers
10. More pictures for your reference:
Additional Information
| Payment Terms | T/T, Western Union, Paypal, Others |
|---|---|
| Minimum Order | 25pcs small trial order |
| Lead Time / Delivery Time | 5 Day(s) |
| Sample Available | YES |
| Delivery Details | 3-7days(according to your amount) |
| FOB Port | Shenzhen |
| Loading Info | By sea/airUPS, DHL, Fedex and other shipping. |
| Packing Info | Pearl cotton (Carton) 129*24*25cmPaper tube (Carton) 127*24.5*24.5 cm |
| Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
T8 LED Tube 1200mm 18W
Good Quality SMD LED Tube Lamp
Shenzhen Public LED Light Eertificated Tube
Related ProductsProduct Categories-
T8 LED Tube(3245)
-
Others(959)
-
T5 LED Tube(1144)
-
TUV approvaled led tube(15)
-
Recommend LED Tube(153)
-
UL approvaled led tube(18)
-
T10 LED Tube(2)
-
Hot Sale LED Tube(214)
-
LED Tube(880)
-
Infrared Sensor LED Tube(16)
-
LED Light(1)
-
SCR Dimming LED Tube(4)
-
Remote Dimming LED Tube(15)
-
T8 transfer to T5 LED Tube(3)
-
Microwave Sensor LED Tube(1)
