
White Color Wireless Interconnected Smoke Alarm / Optical Smoke Detector Lyd-614acr
Your message must be between 20 to 2000 characters
Contact Now
White Color Wireless Interconnected Smoke Alarm / Optical Smoke Detector LYD-614ACR
Description:
This detector has been design with both transmitter and receiver in the electronics. Detectors could be wireless interlink able with each other. Once one unit alarms, it will send alarm signal to trigger the other alarms.
It has a DIP switch for setting the detectors ID to avoid receiving other similar alarm signals. Only detectors with the same ID can make up an interconnection group.
Features:
* Infrared photoelectric sensor
* MCU processing
* Auto-reset after smoke clears
* Sound & flash alarm
* LED indicator
* Test & Hush button
* Low battery indication
* Dustproof, mothproof and anti-white light design
Technique Details:
Model: |
LYD-614ACR |
Color: |
White |
Operating voltage: |
AC220V or 110V + 9V backup battery |
Static current: |
<10uA |
Alarm current: |
<35mA |
Alarm indication: |
LED indicator flashes Red |
Alarm sound: |
≥85dB/3m |
Operating temperature: |
-10°C ~ +50°C |
Humidity: |
≤95%RH |
Wireless interconnection frequency: |
433MHz |
Wireless transmitting distance |
200m (open area) |
Detecting area: |
80m² at 6-12m installation height |
60m² at installation height <6m |
|
Unit Size: |
Φ128*38mm |
Alarm & Hush Function
When smoke density in surroundings reaches the alarm threshold of the detector, the buzzer
gives out alarm sound and the alarm indicator flashes rapidly. At this time, pressing the TEST
& HUSH BUTTON will make the detector enter into mute status that lasts for 10 minutes.
During this period, the indicator flashes once per 10s and if the density is still higher than
the threshold, the TEST & HUSH BUTTON is nonfunctional. When the smoke density goes
below the threshold, pressing the TEST & HUSH BUTTON will activate the detector to perform
testing operation. After the 10 minutes, the detector recovers automatically to normal working status.
Interconnection Alarm
Under interconnection condition, if a detector only gives out alarm sound and its alarm indicator
does not flash, it means alarm occurs among the other interconnected detectors. At this time,
press the TEST & HUSH BUTTON to hush the detector alarm sound and find the detector in alarm
status. Meanwhile, check the surroundings of each detector to prevent potential losses.
Competitive Advantage:
* Professional experience and ability to accept and fulfill ODM/OEM orders.
* Answer your enquiries, questions and emails in 24 hours
* Direct control on material, testing, quality, lead time ect.
* Flexible Payment terms ranged at different quantity
* One year warranty life for all detectors sold out from Lydian
Related Keywords