10 Input 3 Satellite And 12 Subscriber Cascade Multiswitch 

Satellite Multiswitches come in many different versions, but they all allow many satellite receivers to share satellite dish and LNB, installation and cabling. They are usually used in hotels, blocks of flats or smaller multi dwelling buildings. They usually accept one aerial input as well as the satellite dish.


                                                                                                        Model Name: SH101012L
Feature:

9 satellite IF 1 terrestrial TV inputs to 22 outputs for satellite receivers
Active gain circuit via terrestrial input
Subscriber port protection up to 100 volts
100m distribution length per subscriber
Subscriber control system with LED
Ergonomically, stylish design
Compatible with terrestrial digital broadcasts [ DVB-T]
Not sensitive to satellite receiver thanks to DiSEqC 2.1 software [firmware]
Low cascading loss at high subscriber extensions.
Zero fault in ports
SMPS power supply
Capable to function even at low signal levels due to high isolation
Easy installation
Low power consumption thanks to new generation component

Specification:

ITEM				TYP		REMARK
Frequency response				47-2150MHz, 950-2250MHz		(ODM:5-2250MHz)
Inputs				9 SAT+1 Teer		F connectors
Outputs				12TAP		F connectors
Trunk loss		Terr 47-862MHz		3dB
		Sat 950-2150MHz		5dB
Tap loss		Terr 47-862MHz		12dB
		Sat 950-2150MHz		4dB
Return Loss		Terr in 47-862MHz		11dB
		Sat in 950-2150MHz		11dB
		Terr out 47-862MHz		8dB
		Sat out 950-2150MHz		8dB
Isolation		LNB-LNB 950-2150MHz		32dB
		OUT-OUT	Terr 47-862MHz	25dB
			Sat 950-2150MHz	30dB
		H/V	Sat 950-2150MHz	28dB
Rejection				28dB
Output Level Sat.(IMD3-35dB)				100dBμV
Output Level Sat.(IMD3-35dB)				83dBμV
Power supply				90 ~260Vac/47~63Hz
Max.Current Pass to LNB				1200mA
Switching commands				13V,18V,13V/22KHz, 18V/22KHz DiSEqC2.0