Basic Info
Basic Info
Product Description
Product Description
Product Name:2G11 Led tubes
Model No.:SW-2G11-300W20
Basic information for this 20w 2g11 led:
Model No.:SW-2G11-300W20
Basic information for this 20w 2g11 led:
| Item No: | SW-2G11-300W20 |
| Power: | 20w |
| Voltage: | AC85--265V |
| LED Quantity: | 300pcs 3528smd |
| LED luminous: | 1850-1900LM |
| Frequency: | 50-60HZ |
| Constant current error: | <3% |
| Static power consumption: | 0.3W |
| Power factor: | >97% |
| Color temperature: | 2700~7000k |
| Material: | Aluminum+PC |
| Package: | 25/CTN |
Size of 2g11 led:
Products features of this 2g11 led tube with built-in driver:
1. Color consistency high, low-power, low-light decline, long lifespan, good brightness;
2. Use RoHS aluminum, fully solve the LED heat transport problem, so that the lamp can keep in top working condition;
3. High-precision constant current drive, which can extend the LED lifespan;
4. Good material of lens to ensure the best light transmission;
5. No UV or IR radiation, Environment friendly.
6. CE, RoHS approved.
2. Use RoHS aluminum, fully solve the LED heat transport problem, so that the lamp can keep in top working condition;
3. High-precision constant current drive, which can extend the LED lifespan;
4. Good material of lens to ensure the best light transmission;
5. No UV or IR radiation, Environment friendly.
6. CE, RoHS approved.
2g11 led tube lights installation:
1. Turn off power
2. Remove old Fluorescent tubes
3. Access the ballast by removing ballast cover
4. Disconnect and cut wires feeding to the ballast input (live and neutral wires) they should remain as long as possible
5. Disconnect and cut the wires from the ballast output to the sockets (cut wires close to the ballast)
6. Connect the 2 socket wires to the 2 input wires (live and neutral)
7. Install ballast cover and LED tubes, turn power on.
Pictures of this 2G11 led tube lighting:
2. Remove old Fluorescent tubes
3. Access the ballast by removing ballast cover
4. Disconnect and cut wires feeding to the ballast input (live and neutral wires) they should remain as long as possible
5. Disconnect and cut the wires from the ballast output to the sockets (cut wires close to the ballast)
6. Connect the 2 socket wires to the 2 input wires (live and neutral)
7. Install ballast cover and LED tubes, turn power on.
Pictures of this 2G11 led tube lighting:
Related Keywords
Related Keywords
