LPD8806 IC digital Addressable RGB led Dream Color strip Lig
Your message must be between 20 to 2000 characters
Contact Now
Installation Notice:
1) Make sure the connection is correct according to the diagram.
2) Pay attention on the parameters limit on the above form. DO NOT run over the peak value.
3) Keep the surface of installation clear and level avoid breaking off.
4) Avoid the crook area is the just the position of LED and other components, in order to protect the product and extend the life span of the product.
5) in installation please note that led strips the article input and output port
6) when a current in please make sure the input voltage for the article lamp whether DC12V or DC5V
7) the outdoor when using note, the led strips of article exterior waterproofing if there is any breakage.
8) article if the product length needs to change, please in the main light input and add the article input decoder.
Application
The product is widely used in building outline lights, entertainment quasi-decorative lighting, advertisement decorative lighting and so on. The product is waterproof performance, low-voltage DC power supply safety, convenience, variety of LED colors, colorful. By the FPC circuit board, LED lights, made of high-quality silicone sleeve. UV resistant for outdoor use may be aging, yellowing, high temperature and other advantages.
Notice
Make sure the connection is correct according to the diagram.
DO NOT run over the peak value.
Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED
DO NOT attempt to make sharp bends with the strip.
DO NOT install where water or high humidity may be present without further protection.
3M tape used only for indoor, when the strip installed outdoor, please use fixed slot.
Away from strong acid or strong alkali.
Installation Notice:
1) Make sure the connection is correct according to the diagram.
2) Pay attention on the parameters limit on the above form. DO NOT run over the peak value.
3) Keep the surface of installation clear and level avoid breaking off.
4) Avoid the crook area is the just the position of LED and other components, in order to protect the product and extend the life span of the product.
5) in installation please note that led strips the article input and output port
6) when a current in please make sure the input voltage for the article lamp whether DC12V or DC5V
7) the outdoor when using note, the led strips of article exterior waterproofing if there is any breakage.
8) article if the product length needs to change, please in the main light input and add the article input decoder.
Application
The product is widely used in building outline lights, entertainment quasi-decorative lighting, advertisement decorative lighting and so on. The product is waterproof performance, low-voltage DC power supply safety, convenience, variety of LED colors, colorful. By the FPC circuit board, LED lights, made of high-quality silicone sleeve. UV resistant for outdoor use may be aging, yellowing, high temperature and other advantages.
Notice
Make sure the connection is correct according to the diagram.
DO NOT run over the peak value.
Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED
DO NOT attempt to make sharp bends with the strip.
DO NOT install where water or high humidity may be present without further protection.
3M tape used only for indoor, when the strip installed outdoor, please use fixed slot.
Away from strong acid or strong alkali.
