125G residential reverse osmosis membrane
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 6 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | Shenzhen,China |
|---|---|
| Supply Ability: | 10000pcs/week |
2.0 inch diameter water treatment membrane
| active area Ft2(M2): | 5(0.5) |
| Test pressure Psi (MPa): | 65(0.45) |
| water flow GPD: | 125 |
| rejection(%) : | 97% |
With years of advanced mould manufacturing and plastic injection technology in water treatment industry, as well as a group of professional engineers and marketing team, we are engaged in developing our company into a production base of water treatment parts and RO machines.
The membrane has its characteristics as flows: high rejection .it gives high rejection in treating with pestcides,by product of disinfection often seen from the tap water. with high stablities and optimization structure.the membrane adopts the design of wide feed net and short membrane leaves.this series of film owns the high stablity and can be cleaned. we supply wide scope of chioce and complete specifection. in order to meet the need of customer on water output .we can also make special dimension and specification of membrane as customer require.
Notice :test conditions
1.the test is under water temperature 25C,nacl 500mg /l, pH 7.5 and the standard recycle rate and so pressure .
2.the water output deviation of single membrane is between 15percent .of mean value .
3. the lowest desalination rate is 95.0%
Limited conditions
Max operation pressure -----------..600psi (4.2mpa )
Max feed water temperature ----------45C
Max feed water sdi -------------5
Max free chlorine in feed in water -------less than 0.1mg /L
Range of feed water PH value of constant run ----..3 to10
Range of feed water pH value of chemical cleaning --.2 to 11
Max pressure drop of single out membrane -----..15psi(0.1mpa )
Related Keywords
